779807
19
Zoom out
Zoom in
Previous page
1/32
Next page
Always stop the engine and unplug the spark plug before doing any repairs or maintenance.
Never touch the rotating nylon cord or blade.
Check and maintain fuel & oil levels regularly, and maintain the correct levels.
Frequently check at regular intervals for the tightness of all nuts, bolts and screws.
If the machine vibrates badly stop the machine and take it to a service dealer.
Always refuel in a well-ventilated area with the engine off and spark plug HT cap removed.
Whilst carrying out maintenance you must wear appropriate Personal Protective Equipment
(PPE). Suggested PPE Sturdy footwear, work gloves, long trousers and hearing protection.
NEVER use the pressure washer to clean itself. Water can penetrate the power unit and
cause damage the engine. The use of pressure washers will result in shortened life and
reduce serviceability. Shut down the engine, wait for all moving parts to come to a complete
stop, remove HT lead, and then wait for 5 minutes before performing maintenance on the
pressure washer.
Guards and Shields: Make sure all guards and shields are replaced after servicing the pressure
washer. Keep your pressure washer upright: Never lay your pressure washer on its side while
moving, storing, or using it. Oil could leak and damage your pressure washer’s engine and
surrounding areas. You MUST comply with local and current regulations that apply to the use
of your pressure washer. There may be additional regulations that apply if your pressure
washer is used on construction sites.
ITEM FREQUENCY
Remove dust/debris accumulation As needed or required
Inspect fuel and spray system Each use
Clean inlet filter Each use
Check tyre pressures Each use
Perform engine maintenance
(Refer to Engine Owner’s Manual)
Change engine oil: As specified in the Engine Owner’s manual.
After first 5 hours of use
Every year or 100 hours of use after first use.
Perform pump maintenance
(Refer to Pump Owner’s Manual)
Change pump oil: As specified in the Pump Owner’s manual.
After first 50 hours of use
Every 3 months or 500 hours of use after first use.
PARTS
If a part needs replacement, only use parts that meet the manufacturer’s part number
specifications. Replacement parts that do not meet specifications may result in a safety
hazard or poor operation of the Pressure Washer and will VOID the warranty. Major Service,
including installation or replacement of parts, should be made by a qualified service
technician.
Page 19
First edition - April 2017
6. MAINTENANCE
N.B. AR Axial pump are sealed for life-no oil changes required.
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for P1PE P73200T at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of P1PE P73200T in the language / languages: English as an attachment in your email.

The manual is 9.45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info