547424
8
Zoom out
Zoom in
Previous page
1/18
Next page
Page 8 of 18
4. Place on the Oyster
First plug in the two connectors into the matching receptacle.
The black cable has to be fed out into the REAR direction. Now
place the Oyster onto its mounting plate. Put the cable into either
one of the two given slots in the cabinet. Do not fix the box with
the nuts for the moment.
5. Fixing of the aluminium elbow (cable-feed-through)
Take care to fit the elbow in the correct way. The intake of the
cable has to point to the back of the vehicle.
a) Drill a hole of approx. 15mm (1/2 inch) into the roof. Decide
the location of the hole wisely to avoid any extra work inside the
vehicle.
b) Place the elbow on its intended position above the hole. Do
the necessary cable work on the roof. Push or pull the cable
through the elbow until you have a proper length outside the
vehicle. It will be very difficult to shift the cable after the final
fitting of the elbow! Guide the receiver-side end of the cable
through the hole. Any cable that is possibly remaining must be
placed inside the vehicle.
c) Clean the elbow and the area around the hole and fix the
elbow with glue, similar to the fitting of the mounting plate. Apply
some extra glue into the hole to prevent water from coming in at
any later time.
d) Finally, fix the elbow with the screws supplied. Again, apply
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Oyster Digital CI at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Oyster Digital CI in the language / languages: English as an attachment in your email.

The manual is 0,48 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Oyster Digital CI

Oyster Digital CI User Manual - English - 65 pages

Oyster Digital CI User Manual - English - 34 pages

Oyster Digital CI User Manual - German - 53 pages

Oyster Digital CI User Manual - Dutch - 36 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info