547424
28
Zoom out
Zoom in
Previous page
1/34
Next page
28
With very strong wind it is recommended that you retract the antenna for the video
operation. With switched off equipment (standby) no video operation is possible!
Configuration
Using this menu point the various settings for the operation of the Oyster Digital can be
carried out. All the automatic search functions relating to settings are carried out here.
Stand-by mode:
The “Comfort” setting permits you to switch the equipment on again
with the remote controller (red button) if it has been switched into standby. This
readiness position during standby will be indicated by a small green point in the display.
The “Power saving” setting switches in the standby situation also for the remote control
receiver and the display of the green light point. In this case the switching on again can
no longer be carried out with the remote control, to switch on the two buttons on the
indicator unit must be pressed for a short time only.
Search satellite:
Here can be selected which satellite the equipment should proceed with
following the switch-on for the fully automatic search or the local search. There are
various satellites to choose from covering the various areas and language programme
ranges. Please note, that not all satellites can be received everywhere! (See Search satellite
appendix, page 33).
Automatic satellite change:
The “Active” setting checks on a programme change
whether the newly selected programme is transmitted by another than the currently
received satellites. If such a satellite change is recognised the equipment will
automatically travel to the new satellite.
The “Off” setting deactivates the automatic satellite change. This can be necessary, if the
automatic satellite change does not function due to the weaker signal and you want to use
the manual search. (See manual search, page 26).
LED rotation display:
The “Yes” setting ensures, that the channel number is indicated
in the display standing on its head. This is of use, if the external indication unit is
mounted with the buttons “hanging” downwards. This means that the channel number
will again be normally readable.
The “No” setting is intended for a “normally” mounted display, with the buttons
pointing upwards.
28


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Oyster Digital CI at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Oyster Digital CI in the language / languages: English as an attachment in your email.

The manual is 0,41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Oyster Digital CI

Oyster Digital CI User Manual - English - 65 pages

Oyster Digital CI Installation Guide - English - 18 pages

Oyster Digital CI User Manual - German - 53 pages

Oyster Digital CI User Manual - Dutch - 36 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info