547424
30
Zoom out
Zoom in
Previous page
1/34
Next page
30
Problem indication
Problems can occur during the operation of the automatic antenna unit if e.g. the
freedom of movement of the antenna is not guaranteed (branches, snow, etc.).
The type of interference will be automatically recognised and presented on the external
indication as a fault code.
Display Fault description Interference elimination
E 01 No satellite signal could
be found.
Change your location. Do you have a free view
to the North? Are you in the receiving area of
a satellite?
E 02
E 03
Dish blocked in the
rotation direction /
elevation direction
Is an object projecting into the movement area
of the antenna? Is the supply voltage too low
(weak battery)? Switch the equipment off with
the MUTE button (hold down for 3 seconds)
and then switch on again.
E 04 Dish cannot completely
retract and switch off
Press EXIT to close the antenna again.
Remove snow, leaves or other objects from
the storage hollow in the antenna body.
E 05
E 06
Top box does not
respond after the switch-
on or does not react to
commands
Is the red (10Amp.) fuse OK? Are all the
cables correctly inserted?
E 07 Short-circuit in the
antenna cable or LNB
Check the white antenna cable and the plug.
E 08 No or low voltage for
the top box
Check the fuses on the rear side of your
receiver.
E 09 No LNB connected or
LNB out of order
Insure that the white IF lead is properly
connected to the receiver, the top box and the
LNB. In rare cases your LNB might by faulty
as well.
E10, 11, 12 Voltage drops occur
while dish is moving
You should charge up your battery ASAP.
This is a warning only.
E 15 Faulty response from
top box
The interconnection from decoder to top box
could be weak and should be checked.
E 16 Model configuration
fault
The internal configuration of your decoder
does not match to Australian conditions.
Contact your dealer for assistance.
E 17 Re-initialisation
performed
One or more memory errors have been fixed
automatically. Please restart your decoder.
E 99 Buffer overflow Switch the main switch to OFF, wait for 10sec
and switch ON again to restart the decoder
30


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Oyster Digital CI at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Oyster Digital CI in the language / languages: English as an attachment in your email.

The manual is 0,41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Oyster Digital CI

Oyster Digital CI User Manual - English - 65 pages

Oyster Digital CI Installation Guide - English - 18 pages

Oyster Digital CI User Manual - German - 53 pages

Oyster Digital CI User Manual - Dutch - 36 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info