695212
7
Zoom out
Zoom in
Previous page
1/16
Next page
1312
Troubleshooting
Problem Possible Cause Solution
Grinder does not
start after pressing
the OXO button
Grinder not plugged in Plug power cord into 110V/120V outlet.
Bean hopper is not
attached properly
Gently remove and reinstall bean hopper
ensuring it is seated properly.
Grinder overheated
Wait 30 minutes to allow Grinder to cool down;
after 30 minutes try the Grinder again.
Grinder stops mid-cycle
Foreign item trapped in burrs
Unplug power cord and remove hopper. Inspect
hopper, upper and lower burrs. Remove any
foreign objects.
Grinder overheated
Wait 30 minutes to allow Grinder to cool down;
after 30 minutes try the Grinder again.
Grinder is louder than normal
Grinder blocked
with foreign item
Unplug power cord and remove hopper. Inspect
hopper and burrs, and remove any foreign
objects.
One type of roast continuously
clogs Grinder
Dark, oily beans can
clog grounds chute
Unplug power cord and remove hopper.
Use a small exible brush to clean grounds chute,
where grounds dispense. If problem persists, use
coffee Grinder cleaning tablets.
Grounds container overlls and
coffee grounds back up into
chute
Grinder is clogged
Unplug power cord and remove hopper. Use a
small exible brush to clean grounds chute.
Troubleshooting
Problem Possible Cause Solution
Grinder starts but produces no
coffee grounds
Hopper trap door is blocked
Check to ensure there are no beans stuck
in the hopper’s trap doors.
Grounds chute is clogged Use a small exible brush to clean grounds chute.
Beans not owing out of hopper
Remove hopper lid and stir beans in hopper with
a wooden spoon to help separate oily beans
that can stick together. Replace lid and try
grinding again. If problem persists, empty hopper
completely and wipe down the inside with a
damp cloth or hand wash with warm, soapy
water. Let dry before relling with beans.
Upper burr is not fully
locked into place
Turn handle clockwise rmly to ensure burr is
locked in place; it will click into place when secure.
More static than usual
Many factors contribute to the
amount of static created while
grinding coffee, including different
types of coffee beans and roasts and
the humidity level in the air.
Wipe down surfaces with damp towel and dry
thoroughly. You may also let the grounds rest
in the grounds container for 30 seconds before
moving the container from the Grinder. This will
allow the static to dissipate.
Grounds container not seated
properly underneath chute
Ensure Grinder base is completely clear of coffee
grounds. Position grounds container onto base,
pushing back until it’s fully seated under chute.
The container will lightly click into place.
For the most up-to-date troubleshooting information, visit www.oxo.com
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for OXO Brew Conical Burr at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of OXO Brew Conical Burr in the language / languages: English as an attachment in your email.

The manual is 1,67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info