Manual OXO Brew Conical Burr (page 6 of 16) (English)

695212

Zoom out

Zoom in

1/16

1110

1 Run Grinder

Run for 10 seconds with an empty bean hopper to

clear beans/grounds from the burrs and grounds

chute. Unplug Grinder.

Always unplug power cord from outlet before removing or

replacing hopper.

2 Remove hopper

Turn knob inside hopper counterclockwise until it

clicks. The “trap door” feature will keep beans

securely inside while hopper is removed.

3 Remove upper burr

Clear any coffee beans from between Grinder

burrs. To remove upper burr, lift metal burr handle

and twist counterclockwise, then pull straight up.

Note: Only the upper burr is removable.

4 Clean burrs and grounds chute

Use a small bristle brush. Never use water or other

liquids to clean the inside of the Grinder/burrs.

5 Replace upper burr

Align indents in burr with tabs inside lower burr. Turn

clockwise until burr clicks into place. To test burr

installment, pull handle straight up. If properly posi-

tioned, burr will stay in place.

Note: If coffee beans have not been emptied from area

around burrs, burr may not lock into place properly.

6 Wipe base and body

Clean Grinder exterior with a soft, damp cloth.

7 Replace hopper

Align the tabs of the hopper with the notches in the

Grinder. Press down gently and turn knob clockwise

until hopper locks into place.

Hand wash hopper and

grounds container

Rinse and dry thoroughly.

Coee Scoop

is Dishwasher Safe

Cleaning Your Grinder

Do not use abrasive pads, harsh chemicals or spray cleaner

chemicals to clean. These may damage the surface of the appliance.

Do not put any part of your Grinder in the dishwasher.

Always unplug your Grinder before cleaning it. Any service or

maintenance other than cleaning should be performed by an

authorized service representative. For more information,

call OXO Customer Service at (800) 545-4411.

Let cool

Let Grinder cool for at least two minutes after each

use. If the Grinder is used for more than ve minutes

within a 10-minute period, it may become inoperable

for 30 minutes. Once the Grinder has cooled down,

you may resume use.

Clear grounds from chute

If you don’t grind regularly, make sure to clear the

ground coffee from the chute before each use. To

clear the chute: Run your Grinder for 10 seconds

before adding beans. Discard the grounds. You are

now ready to grind your fresh beans.

Use fresh beans

Old/dry beans will create static which can result in

dust sticking to walls of Grinder. Do not store beans in

the bean hopper for an extended period of time.

We recommend grinding only coffee in this Grinder.

Never ll the grounds container past the ll line. Excess grounds

can block the grounds chute and jam the burrs.

Caring for Your Grinder

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of OXO Brew Conical Burr in the language / languages: English as an attachment in your email.

The manual is 1,67 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

OXO Brew Conical Burr Manual

Product: