606571
7
Zoom out
Zoom in
Previous page
1/42
Next page
Oxford Hotgrips instructions v.8 switch - 09/07/12
7
Power interruption avoidance:
- The switch can survive temporary power losses without resetting (ie. having to be switched back on again
manually). So if a bike has dodgy electrics, the grips won’t keep switching themselves off every time there’s
a drop out in the power supply.
J: Technical Data
This switch is extremely efcient and in standby will only draw 71 microamps (0.071mA). Therefore long term
connection will not flatten a battery.
This switch can offer power upto 10amps although the Hotgrips themselves will only draw 3.6Amps on average.
This switch has been lab tested to ensure EMC compliance and more importantly has been subjected to the most
severe automotive spike and pulse laboratory testing to ensure that none of the electrical circuits on the motorcycle
could damage or interfere with the operation of the switch.
Conforms to Directive 97/24/EC as last amended by 2009/108/EC.
12 Volt Systems only (Typical running voltage between 13.5 and 14.3 Volts)
Current drain: Average 3.6amps per pair (up to 2.0 amps each – 28 Watts - 30 Watts)
Fuse: 5Amp mini-blade fuse (available in all automotive shops)
On some motorbikes that have older or small capacity batteries, the extra electrical current demanded by the
Hotgrips can reduce the battery voltage levels and replacing this by charging is recommended. Therefore, we always
advise you to connect the battery to a charging system such as the OXFORD Oximiser or Maximiser when the bike is
not in use.
Oxford Hotgrips instructions v.8 switch : 20/6/2012
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Oxford OF692 HotGrips at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Oxford OF692 HotGrips in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 3,23 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Oxford OF692 HotGrips

Oxford OF692 HotGrips User Manual - English - 7 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info