606571
6
Zoom out
Zoom in
Previous page
1/42
Next page
Oxford Hotgrips instructions v.8 switch - 09/07/12
6
I: Usage guidelines
Once fitted, the OXFORD HotGrips are designed for keeping gloved hands at a comfortable warm temperature. Small
changes to the ambient temperature will affect the temperature of the HotGrips and it is necessary to adjust the Intelligent
Heat Controller settings (up or down) as appropriate. If the grips are too hot please ensure the heat controller is turned
down or even switch it OFF if necessary.
Switch operation
The heat controller has 2 raised buttons to make it easier to locate and feel the buttons when riding, especially in
the dark.
To turn the switch ON just press the + button once.
The switch will turn on at the minimum setting
to facilitate a quick warm up of the grips either press the + button to reach the 100% LED or hold the button down
and it will jump to the 100% setting.
To change the temperature just press the – or + buttons and the selected power level will be shown on the LED
light.
To turn the power OFF from any heat setting, either hold the – button for 2 seconds or press the – button until no
power lights are lit
Switch features
Now has 5 heat settings:- 30%, 40%, 50%, 75% and 100%
Battery saving mode (BSM)
This amazing new feature recognizes if either the battery voltage falls too low, or it’s high enough but suspiciously
quiet (ie. the engine has stopped)
When in this state, the BSM LED ashes, the power LED still lights as normal, and the button still works - but the
grips don’t actually get powered.
As soon as the battery voltage recovers and/or there’s a bit of noise on the power supply, the ‘battery saving’ LED
goes out and the grips work as normal
The controller goes into BSM after 5 seconds of the voltage being less than 11.5V, or after 2 minutes of not
detecting any noise on the 12V power lead. Once in this mode, it will wait a further 5 minutes or thereabouts before
switching off completely.
If the rider does not want or like this feature, the BSM can be disabled by switching the controller on and then
pressing and holding both buttons together for 5 seconds.
During this time, the BSM LED will indicate whether the BSM feature is currently enabled (LED on) or disabled
(LED off).
After 5 seconds the state of the LED will change, and the user can let go of the buttons.
The controller remembers this state permanently, or until the user switches it back by repeating the above procedure.
Intelligent heat
controller
5 amp
fuse
+
Battery
connections
Block connector
+
12V
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Oxford OF692 HotGrips at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Oxford OF692 HotGrips in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 3,23 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Oxford OF692 HotGrips

Oxford OF692 HotGrips User Manual - English - 7 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info