682694

Otto Bock Dino 3 Manual

18
Zoom out
Zoom in
Previous page
1/88
Next page
18
Intended Use
The Dino® 3 mobility base for seating shells is designed solely for use with seating systems for people who are unable
to walk or who have a walking impediment. It can be moved either by the patient or by another person.
The Otto Bock Warranty applies only when the product is used according to the specied conditions and for the
intended purposes, following all manufacturer’s recommendations.
CE conformity
This product meets the requirements of the 93/42/EWG guidelines for medical products. This product has been
classified as a class I product according to the classification criteria outlined in appendix IX of the guidelines. The
declaration of conformity was therefore created by Otto Bock with sole responsibility according to appendix VII of the
guidelines.
Preface
Thank you very much for your decision to use an Otto Bock HealthCare product. In order to ensure that you will be
completely satisfied when using this product, please read the following instructions.
The design, as described in these Instructions for Use, is subject to technical alterations without notice. If there are
any questions, do not hesitate to ask your rehabilitation technology supplier.
The “Accessories” section (page 21) presents additional parts for the Dino® 3, which may extend the range of appli-
cation and increase comfort.
The “Adjustability / Assembly Instructions” section (page 23) describes the possibilities of adjusting the mobility base
to your individual requirements.
Safety Instructions
To avoid potentially dangerous situations such as tipping, you should become familiar with your new mobility base
with seating shell on level ground first.
Do not use the footrests as a stepstool when getting into or out of your mobility base with seating
shell.
Get to know how the mobility base reacts when the center of gravity shifts; for example on slopes or
inclines or when clearing obstacles, like steps and curbs. This should be done only with assistance from
another person. Using the anti-tipper is strongly recommended for untrained wheelchair users.
Park the mobility base with seating shell only on level surfaces. If you have to park it on an incline, make
sure that you bring the seat to an upright position because there is a risk that it can tip over backwards
when in a reclined position.
Please note, that the seat may only be tilted with the anti-tipper in operational position.
When reaching for objects in front, side or behind the wheelchair, be sure the patient does not lean out of
the seating shell too far since the shift in the center of gravity might cause the chair to tilt or tip over.
Use your mobility base with seating shell properly. For instance, do not jump it down from higher surfaces
and do not drive against obstacles (including steps, curbs) without braking.
The anti-tipper is a component that has been designed to prevent the wheelchair from tipping over
backwards. The anti-tipper should never be used to support the back of the wheelchair with the rear
wheels removed.
… 18 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Otto Bock Dino 3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Otto Bock Dino 3 in the language / languages: English, German, Dutch, French, Italian, Swedish, Spanish as an attachment in your email.

The manual is 0,91 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info