Manual Otto Bock A 200 (page 27 of 38) (English, German)

682682

Zoom out

Zoom in

1/38

7.5 Footrest

Figure 13 Figure 14

To remove the footrest, the calf band must be unhooked first. Now it is easy to release the footrest lock and

then swing away the footrest either inwards or outwards as shown in figure 13. When in this position, the foot-

rest can be pulled upwards and removed.

For remounting, first relocate the footrest in the inner position and swing it back into position so the lock

engages. Finally, reattach the calf band to the holding device.

By loosening the screw at the rear of the hanger, the footrest height can be adjusted to suit the lower leg length

and compensate for the seat cushion height the user uses.

8 Getting Into and Out of the Wheelchair

Thanks to the modular design of the A200, it is easy to get into and out of the wheelchair. The armrests and

footrests can be removed easily and thus allow easy access for transfer from the side or from the front.

8.1 From the Side

Move the A200 power wheelchair as close as possible to the seat. Remove the armrest on the side where the

user will get into the wheelchair (Fig. 10). The footrest can also be removed if necessary (Fig. 13). Now the

user can slide onto the wheelchair‘s seat. Use of a transfer board will make transfer easier.

8.2 From the Front

After flipping up the two footplates, the user can get into and out of the wheelchair from the front (Fig. 15).

Note:

Take care not to get your fingers jammed when swinging the footrest away or back in place (Fig. 13).

Note:

Ensure all screws are firmly retightened after making any adjustments.

Figure 15

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Otto Bock A 200 in the language / languages: English, German as an attachment in your email.

The manual is 2,61 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Otto Bock A 200 Manual

Product: