Manual Oregon Scientific WR608 (page 9 of 53) (English, French, Spanish)

796951

Zoom out

Zoom in

1/53

To set the location:

1. Press and hold MENU to enter setting mode.

2. Press to navigate to “Set Location” and press MENU

to conﬁrm.

3. “CO:ALL” or “CO:---“ will be displayed. Press MENU,

characters on the right will ﬂash. Press / to

select “ALL” (receive all warnings) or “---“ (disable the

ALL option), press MENU to conﬁrm selection.

4. Digit next to C will ﬂash. Press / to select where

you want to store the location, e.g., C1. Press MENU to

conﬁrm. The 6 digits will ﬂash.

5. Press MENU. NAME / FIPS will ﬂash. (Select either

option a or b below)

a. To program by State / County name:

i. Press MENU to enter setting options.

ii. Press / to navigate to state and press

MENU to conﬁrm. Repeat for county.

iii. Press to navigate to next storage location

(e.g., C2) and press MENU to conﬁrm. Repeat

steps i-iii.

b. To program by SAME code from the NWS:

i. Press to navigate to FIPS and press MENU

to enter setting options.

ii. Press / repeatedly to select number

and press MENU to conﬁrm and move to the

next digit.

iii. Repeat step ii for all digits.

iv. After all digits have been conﬁrmed, storage

location (e.g., C1) will ﬂash. Press to

navigate to next storage location and press

MENU to conﬁrm. Repeat steps ii – iii.

Once all desired codes have been stored, press EXIT twice

to return to default clock display.

NOTE If at step 3 you select “C0:All” you will receive all

warnings within the unit’s reception range. This may result in

giving you information for regions that are not relevant. The

regions can be as large as 5,000 square miles (13 sq km). If

you select “CO:----” you will disable the ALL option and will

only receive warnings from speciﬁed local areas.

NOTE Once the location name is selected, the

corresponding FIPS code will be set into the memory.

You cannot convert the code back to the location name.

(FIPS is the Federal Information Processing System number

assigned to each State, or open waters in or around the US.

The SAME code comprises of numbers generated by the

FIPS system.)

ACTIVATE / DEACTIVATE LOCATION

You can activate / deactivate 1, some, or all of your stored

locations.

When a location is activated,

the 6-digit SAME code can be

viewed in your stored locations

display.

When a location is deactivated,

“----” can be viewed in your

stored locations display.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Oregon Scientific WR608 in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 3.49 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Oregon Scientific WR608 Manual

Product: