796951

Oregon Scientific WR608 Manual

8
Zoom out
Zoom in
Previous page
1/53
Next page
EN
7
NOTE Many counties have been subdivided into as many
as 9 smaller subsections. The numbers 1-9 in the far left
column of the SAME code identifies specific subsections of
a county. If a county has not been subdivided, the first digit
of the SAME code will be 0.
CHANNELS
ABOUT RADIO CHANNELS
The NWR radio channels work in the same way as a regular
radio channel. All of the NWR transmission stations operate
on 1 of 7 frequencies.
CHANNEL CORRESPONDING RADIO FREQUENCY
1 162.400 MHz
2 162.425 MHz
3 162.450 MHz
4 162.475 MHz
5 162.500 MHz
6 162.525 MHz
7 162.550 MHz
AAuto – the unit will tune to the strongest RF
signal available
The unit labels each frequency as a channel (1-7 or Auto).
Once the radio frequency for a region has been selected
the unit will receive voice and code information from that
station.
The channel number in use can be viewed on the top left-
hand corner of the LCD.
SETTING THE RADIO CHANNEL
To change the radio channel:
1. Press and hold MENU to enter setting mode.
2. Press / to navigate to “Set Channel”, press
MENU to confirm.
3. Press / to select suitable channel for your area
(1-7 or Auto), e.g., select Channel 1 (162.400 MHz) for
Broadwater, Montana.
4. Press EXIT twice to return to default clock display. Top
left corner of the LCD will display the selected channel.
LOCATIONS
SETTING THE LOCATION
You need to set the location so that you can receive weather
and environmental information for an area that is relevant
to you.
You can choose the location by either the state and county
name, or FIPS code. Up to 9 locations (1-9) can be stored.
NOTE If you do not set a location, the radio will use the
default setting “CO:All” for all counties.
… 8 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Oregon Scientific WR608 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Oregon Scientific WR608 in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 3.49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info