796937
3
Zoom out
Zoom in
Previous page
1/25
Next page
EN
3
2. Mount the unit where you want to monitor the readings.
Or you can make use of its table stand to place it on a
flat surface.
THE MAIN UNIT
The main unit gives you all the readings and controls. It
should be placed indoors.
The main unit is powered up by the 12V AC adapter.
To install it,
1. Position the main unit and other units within effective
range 328 ft (100 m).
2. Insert four UM3 or “AA”-sized alkaline batteries for
backup purposes.
3. Mount the main unit safely in place. Or use its table
stand to place it on a flat surface.
4. Connect the AC power adapter to the main unit and a
wall socket.
5.
Press the [RESET] button on the main unit to initiate
operation.
The main unit will start searching for signals for about four
minutes. Upon successful reception, the readings will be
displayed. The main unit will update the readings at regular
intervals.
NOTE If the main unit is operating solely on battery power,
the EL backlight and RS232 connection will be disabled.
LOW-BATTERY WARNING
There are low-battery indicators [ ] for the main unit, rain
gauge, baro-thermo-hygrometer, thermo-hygrometer and
optional remote thermo and thermo-hygro sensors. Replace
the batteries when the respective indicators light up.
NOTE
T
he readings collected from the thermo-hygrometer
and any optional remote thermo and thermo-hygro sensors
share the same display window. The “OUT” and remote
channel will share the same low-battery indicator. When
the battery level of the thermo-hygrometer is low, the low-
battery indicator will turn on. If it is one of the optional
remote sensors, the low-battery indicator will blink. To
locate the channel in question, press the window to scan
through all available devices. The low-battery indicator will
stop blinking if the battery level is low for that one.
SECTION 3 OPERATION
THE MAIN UNIT
A. WEATHER FORECAST AND BAROMETRIC
READING WINDOW
B. INDOOR TEMPERATURE WINDOW
C. INDOOR HUMIDITY WINDOW
D. OUTDOOR/CHANNEL TEMPERATURE WINDOW
E. OUTDOOR/CHANNEL HUMIDITY WINDOW
F. RAINFALL WINDOW
G. CALENDAR CLOCK AND DAILY ALARM WINDOW
H. WIND SPEED AND DIRECTION WINDOW
I. CHANNEL BUTTON
J. MEMORY BUTTON
K. ALARM BUTTON
L. SET BUTTON
M. UNIT BUTTON
N. ALARM ON/OFF BUTTON
O. [] BUTTON
P. [] BUTTON
Q. [ RESET] BUTTON
R. RS232 SERIAL PORT
S. DC 12V JACK
WMR968_EN_output 12/17/2004, 15:053
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Oregon Scientific WMR968 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Oregon Scientific WMR968 in the language / languages: English as an attachment in your email.

The manual is 1.6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info