677442

Oregon Scientific WMR89 Manual

8
Zoom out
Zoom in
Previous page
1/122
Next page
6
EN
Secure the sensor in the desired location using the wall
mount bracket or table stand.
RAIN GAUGE
The base station and rain gauge should be positioned
within an effective range: about 100 meters (328 feet)
in an open area.
The rain gauge should be mounted horizontally about
1 meter (3 feet) from the ground in an open area away
from trees or other obstructions to allow rain to fall
naturally for an accurate reading.
Make sure the rain gauge is connected to the base station
before installation.
To check the connection:
1. Press SELECT until the selected area icon is in
the middle right display area.
2. Press MODE repeatedly until displays.
3. Tilt the tipping funnel on the rain gauge several times,
wait for a few seconds and then verify a numerical
reading on the base station.
If no reading displays, press the SEARCH button on
the back of the base station to initiate a wireless sensor
search.
To ensure a level plane:
Put a few drops of water on the cross at the base of the
funnel to check the horizontal level.
1
23
4
Water will pool to the center of the cross when the rain
gauge is level.
If water remains on 1-4, the gauge is not horizontal.
If necessary, adjust the level using the screw.
NOTE For best results, ensure the base is horizontal to
allow maximum drainage of any collected rain.
TIP Press RESET button on back of the base station to
erase all testing data.
BACKLIGHT
Press LIGHT to activate the backlight for 5 seconds.
CLOCK RECEPTION
This product is designed to synchronize its calendar
clock automatically once it is brought within range of a
radio signal:
WMR89:
• EU: DCF-77 signal: within 1500 km (932 miles) of
Frankfurt, Germany.
• UK: MSF-60 signal: within 1500 km (932 miles) of
Anthorn, England.
Slide the EU/UK switch to the appropriate setting based
on your location. Press RESET whenever you change
the selected setting.
WMR89A:
• WWVB-60 signal: within 3200 km (2000 miles) of Fort
Collins Colorado.
The reception icon will blink when it is searching for
a signal. If the radio signal is weak it can take up to
24 hours to get a valid signal reception.
indicates the
status of the clock reception signal.
ICON MEANING
Time is synchronized.
Receiving signal is strong.
Time is not synchronized.
Receiving signal is weak.
To enable (and force a signal search when previous
search was unsuccessful)/disable the clock radio
reception:
1. Press SELECT repeatedly to navigate icon to the
clock/calendar/moon phase area.
2. Press and hold SEARCH. displays when it is
enabled.
NOTE For best reception, place the base station on a
at, non-metallic surface near a window in an upper oor
of your home. Place the antenna away from electrical
appliances do not move the antenna when searching
for a signal.
… 8 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Oregon Scientific WMR89 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Oregon Scientific WMR89 in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 50,46 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info