677442
7
Zoom out
Zoom in
Previous page
1/122
Next page
5
EN
The battery icon indicator appears in the
following areas:
AREA MEANING
Weather Forecast
Area
It displays
when the AC
adaptor is disconnected.
Temperature or
Humidity Area
Low battery in the main unit or
outdoor sensor for displayed
channel.
Wind Speed / Wind
Direction / Wind Chil
Area
Low battery in wind sensor.
UVI / Barometer /
Rainfall Area
Low battery in UV/Rain
sensor.
MOUNTING/PLACING OF SENSORS
WIND SENSOR
Make sure the wind sensor is connected to the base
station before installation.
To check the connection:
Press SELECT until the selected area icon is in the
top right display area.
Wind speed: Gently rotate the wind vane and conrm
a numerical reading on the base station, e.g. .
Wind direction indicator. Move the direction of the
wind indication and verify the icon moves in the same
direction
.
The sensor should be positioned in an open area
away from trees or other obstructions.
To install the wind sensor:
a
b
Secure the sensor connector in the desired location:
a. Align the back of the sensor connector to an existing
pole. Secure in place by inserting the ends of the
U-bolt into the holes on the sensor connector and
securing it with washers and bolts.
OR
b. Insert 4 type A screws into the holes of the sensor
connector. Screw rmly into place, i.e., fence.
Slide wind vane onto the smaller end of the sensor
connector.
IMPORTANT Make sure the wind sensor points to north
in order to record accurate readings.
TEMPERATURE / HUMIDITY SENSOR
Make sure the temperature/humidity sensor is
connected to the base station before installation.
To check the connection:
1. Press SELECT until the selected area icon is in
the bottom left display area.
2. Press UP / DOWN to select channel 1 and verify
a numerical reading.
To install the temperature/humidity sensor:
1.5 m (5 ft)
TIP Ideal placements for the sensor would be in any
location on the exterior of the home at a height of not
more than 1.5 meters (5 feet) and which can shield it from
direct sunlight or wet conditions for an accurate reading.
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Oregon Scientific WMR89 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Oregon Scientific WMR89 in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 50,46 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info