587086

Oregon Scientific WMR100NA Manual

8
Zoom out
Zoom in
Previous page
1/17
Next page
6
EN
3. Insert the versatile plastic base into the pole. Align the
holes of the pole with the holes of the plastic base.
4. Secure the plastic base by inserting the screw and
screwing it tightly into the holes of the plastic base
and pole.
IMPORTANT The
sensor should be
positioned in an open
area away from trees or
other obstructions.
5. Hammer pole (cone end down) into the ground at the
desired spot until versatile plastic base is level with
the ground.
TIP Place a block of wood between the pole and the
hammer to prevent damage to the pole.
6
7
8
9
6. Assemble middle pole on top of the bottom one.
7. Using two screws, fix it firmly into place.
8. Assemble top pole on top of the middle one.
9. Using two screws, fix it firmly into place.
11
10
10. Slide the vertical attachment bracket on top of the top
pole.
11. Using two screws, fix it firmly into place.
To mount the temperature / humidity sensor:
12
12. Slide outdoor sensor onto vertical attachment
bracket.
To mount the wind sensor:
13
14
13. Insert the wind vane into the attachment bracket.
14. Screw aluminium pole firmly into place.
IMPORTANT For best results, point the wind vane North.
Securing the assembled remote unit:
16
15
15. Insert the 2 rectangular base legs through the holes
of the versatile base and hammer down.
16. Using the string, tie a knot on the eye pins. Hammer
each eye pin into the ground at a 90° angle.
IMPORTANT Using
the fasteners, tighten
the string. To tighten,
pull fastener down.
To loosen, thread the
string up through the
fastener eyelets.
ALTERNATIVE SET UP: REMOTE WIND
SENSOR ON EXISTING POLE
1
2
3
1. Secure the plastic base onto existing pole with U-
bolts, washers and bolts.
2. Insert the horizontal attachment bracket into the
base.
3. Using a screw, fix firmly into place.
… 8 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Oregon Scientific WMR100NA at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Oregon Scientific WMR100NA in the language / languages: English as an attachment in your email.

The manual is 6,89 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Oregon Scientific WMR100NA

Oregon Scientific WMR100NA User Manual - German - 18 pages

Oregon Scientific WMR100NA User Manual - Dutch - 17 pages

Oregon Scientific WMR100NA User Manual - French - 18 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info