587046

Oregon Scientific TD339HSC Manual

10
Zoom out
Zoom in
Previous page
1/34
Next page
10
ENG
Note: The handset number will display after the assigned name. For example, if
you named handset 2 “Sally”, it will appear as “Sally 2”. The number cannot
be changed.
Tip: To return to standby mode, press and hold the
button.
Charging the handset batteries
The batteries may take up to 15 hours to fully charge the first time you use
them.
The battery icon on the handset display becomes progressively empty as the
batteries become low. When the batteries are fully charged, the icon looks full
and dark, as shown here
. When the icon appears empty as shown here
or if you hear the warning beep during a call, please:
• End the call as soon as possible.
• Don’t use the speakerphone mode since this consumes more energy than
the normal talk mode.
• Put the handset back on the charger for charging until the battery icon
returns to high level.
To charge the handset, put it in the charger with the keypad facing outwards. The
blue CHARGE light steadily lights to indicate that the handset is charging. When
the battery indicator appears full, and the charge light goes off, the batteries are
fully charged.
Replacing the batteries
Rechargeable batteries may need to be replaced from time to time. If you find
that you can no longer recharge the batteries, replace them with two new
batteries of the same size (AAA) and type (rechargeable Ni-MH) following the
instructions on page 6.
Attaching the belt clip
To attach the belt clip to the back of the handset:
1. Slide the belt clip over the back of the handset until the ventilation holes .
are aligned.
2. Gently push the belt clip until it clicks into place.
USING THE HANDSET
Before you start
When you first set up your handset, you may hear an out of range beeping tone
and see the words Base 1 flashing on the handset display area. This is normal,
and means that the handset needs to synchronize with the base unit before you
can use it. Hold the handset near the base unit for a few seconds until the
handset display stops flashing.
… 10 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Oregon Scientific TD339HSC at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Oregon Scientific TD339HSC in the language / languages: English as an attachment in your email.

The manual is 0,69 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info