587046

Oregon Scientific TD339HSC Manual

9
Zoom out
Zoom in
Previous page
1/34
Next page
9
ENG
Clearing all registrations
If you have registered numerous handsets and base units in your ThermoDECT
telephone system, you may experience problems registering new handsets as your
system becomes more complex. A single base unit can carry a maximun of 5
handsets. You cannot make intercom, 3-way, baby monitor, or transfer calls be-
tween handsets that are registered to two different base units. To clear all registra-
tions and reorganize your telephone system, perform the following procedures. You
will have to re-register the handsets and base units after you clear the system (refer
to page 7 for instructions).
To reset the registration information for a handset:
1. Remove the batteries.
2. Press and hold the
button.
3. Insert the batteries and close the battery compartment.
4. Release the
button. The handset display will flash the word TEST and sound
with a melody.
5. Press the 5 key. The handset will show the words Not registered on the
display.
6. Repeat Steps 1-5 to reset all the other handsets.
To reset the registration information for the base unit:
1. Unplug the base unit from the AC power source.
2. Press and hold the PAGE button
3. Plug in the base unit. The blue charge/in use light will flash.
4. Release the PAG E button after the blue light flashes three times.
5. Reregister all the handsets following the procedure on page 7.
Assigning a name to the handset
You can assign an 8-character name for your new handset. The name you assign
will display on the LCD display area for the handset whenever the phone is in
standby mode. To assign a name:
1. Press the
button.
2. Press to select Handset Menu from the options.
3. Press
.
4. Press to select Handset Name from the options.
5. Press
.
6. Enter the new name for the handset using the chart on page 13 as a guide.
Press the
button to delete the current entry. The maximum length for
the name is 8 characters.
7. Press
to confirm your selection.
… 9 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Oregon Scientific TD339HSC at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Oregon Scientific TD339HSC in the language / languages: English as an attachment in your email.

The manual is 0,69 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info