Manual Oregon Scientific TD339 (page 6 of 31) (English)

587045

Zoom out

Zoom in

1/31

ENG

SETTING UP YOUR TELEPHONE

Unpacking the telephone

When you unpack your ThermoDECT phone, make sure to keep all the packing materials in a safe

place, in case you need to later transport the phone or return it for servicing.

In the box, you will find:

• The ThermoDECT phone base unit

• The ThermoDECT phone cordless handset

• Two rechargeable batteries for the handset

• A 220-volt AC power cord

• A telephone line

• An attachable belt clip for the handset

• A remote temperature sensor

• Two regular batteries for the remote sensor

Choosing a location for the base unit

When selecting a location for your base unit, observe the following guidelines:

• Choose a location that provides easy access to a 220-volt AC power source. Never try to

lengthen the power cord. Use an appropriate AC power cord for your local power supply.

• Choose a location that will allow the telephone cable to reach a telephone jack. You can use an

extension jack or cable if necessary.

• Place the base unit as high as possible to obtain the maximum radio frequency range with the

handset. You may need to try several locations – such as upstairs, or near a first-floor landing –

to find the best range. Solid structures such as walls and doors may reduce the signal strength.

• Do not place the base unit near the sink, bathtub, or shower.

• Do not place the base unit near objects that may cause radio interference, such as another

telephone, large metal objects such a mirror or filing cabinet, or electrical appliance such as an

electric stove, washing machine, microwave oven, television, and fluorescent lights.

• Do not place the unit near heat sources such as radiators or air ducts, or in a place subject to

direct sunlight.

• The indoor temperature reading displayed is the temperature recorded at the base unit.

Connecting the base unit

To set up the base unit:

1.Plug the small end of the telephone cord

into the telephone socket located at the

back of the base unit, as shown in the

diagram to the right.

2.Plug the other end of the telephone cord

into the telephone wall socket.

3.Plug the small end of the AC power cord into the power socket located at the back of the base unit.

4.Plug the other end of the AC power cord into a nearby AC wall socket.

Installing the handset batteries

Your ThermoDECT telephone is shipped with two rechargeable Ni-MH batteries (AAA

size). To install the batteries:

1.Open the battery compartment located at the back of the handset unit.

2.Insert the batteries as shown in the diagram to the right, matching

positive (+) polarity to positive, and negative (-) polarity to negative.

Note: Reversing the polarity may damage the handset.

3.Replace the battery compartment by sliding it in the direction shown by the

arrow in the diagram to the right. The lid clicks into place when it is secure.

To phone

wall jack

To AC wall

A. LED indicator

Flashes when the

remote sensor

transmits a

temperature reading.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Oregon Scientific TD339 in the language / languages: English as an attachment in your email.

The manual is 1,08 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Oregon Scientific TD339

Oregon Scientific TD339 Quick start guide - English - 2 pages

Oregon Scientific TD339 User Manual - French - 34 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Oregon Scientific TD339 Manual

Product: