301030

Oregon Scientific td 339 dect Manual

22
Zoom out
Zoom in
Previous page
1/31
Next page
22
ENG
Searching for Remote Sensor
To initiate a remote sensor search, press and hold the “Temp” button for a few seconds. The base unit will
begin to search for all available remote sensors.
Note: The batteries must be installed in the remote sensor and be in good working order.
The search may take up to 3 minutes.
The remote sensor should be less than 10m from the base.
Changing the Remote Sensor’s Channel
The wireless remote sensor uses Radio Frequencies to
communicate with the base station. As such the commu-
nication link can be subject to interference If you sus-
pect interference is causing a communication problem
for your remote sensor you can change the channel it
communicates on.
•Take off back cover
•Change channel
•Replace cover
•Perform search on base by press and hold Temp.
SETTING AND USING THE HANDSET CLOCK
You can change the following time and date settings for the clock display on your handset:
• Time – 12- or 24-hour clock display
• Date – DD/MM (Date/Month) or MM/DD (Month/Date) display
• Current date and time
If you have multiple handsets, you only need to set the time and date on one handset. The alarm can be
set for each handset separately.
Selecting 12- or 24-hour display
To change the handset hour display format:
1. Press the
button.
2. Press to select Setup from the options.
3. Press
.
4. Press again to select Clock Setting from the options.
5. Press
to select Hour Format from the options.
6. Press
.
7. Press to select 12 or 24 hours.
8. Press
to confirm your selection.
Tip: To return to standby mode, press and hold the
button.
Changing the date format
To change the handset date display format:
1. Press the
button.
2. Press
to select Setup from the options.
3. Press
.
4. Press again to select Clock Setting from the options.
… 22 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Oregon Scientific td 339 dect at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Oregon Scientific td 339 dect in the language / languages: English as an attachment in your email.

The manual is 1,08 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info