301030

Oregon Scientific td 339 dect Manual

21
Zoom out
Zoom in
Previous page
1/31
Next page
21
ENG
Using the call waiting feature
If you receive an external call while you are talking to someone through the intercom, you will hear a
call waiting tone. To answer the incoming call:
1. Press the
button to terminate the intercom call.
Result: The external call rings.
2. Press
again to answer the external call.
Transferring calls between handsets
You can transfer an external call from one handset to another if you have registered more than one
handset with your ThermoDECT telephone. To transfer a call:
1. During a telephone conversation, press the
button to place the caller on hold.
2. Enter the handset number (1 – 5) to which you wish to transfer the call.
Result: The handset you paged rings, with EXT and INT flashing on the LCD display. The internal
party can answer the call by pressing the
button.
3. (Optional) Hang up the telephone to transfer the call once someone answers. If no one answer,
press
to terminate the page and return to the caller.
MONITORING THE TEMPERATURE
The temperature is shown on the handset display area, and on the LCD display for
the base unit. You can choose to display the temperature in celsius or Fahrenheit
degrees.
Changing from Celsius to Fahrenheit
To change the temperature display, insert an unfolded paperclip into the C/ F
hole located on the underside of the base unit, as shown in the diagram on this
page. Gently push to toggle the temperature display from one unit of measurement to the other.
You can choose to display the Indoor temperature as measured at the location of the base unit.
Monitoring the Indoor Temperature
The LCD display on the base unit shows you which temperature reading is displayed on both the base and
handset.
To select the Indoor Temperature, press the “Temp” button until “IN” appears on the base display. The base
and handset now display the Indoor temperature. It may take a few minutes for the handset display to be
updated.
Monitoring the Outdoor Temperature
In order to monitor the outdoor temperaturee, the remote sensor must be placed outdoors. The remote
sensor will take about 30 minutes to aclimatize to the outdoor environment.
To select the Outdoor temperature , press the “Temp” button until “OUT” appears on the base display.
If there is no temperature reading displayed, continue to press the “Temp” button until the temperature is
displayed together with the “OUT” icon.
Note: Your Thermo DECT supports up to 3 remote sensors. Each one occupies one of 3 channnels.
If you cannot find a remote sensor on one of the 3 channels please go to the section “Searching
for the Remote Sensor”.
Suggestion: Place up to 3 Remote Sensors in important areas of your home such as the Baby’s Room,
Wine Cellar, Greenhouse. Additional remote sensors are sold separately.
… 21 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Oregon Scientific td 339 dect at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Oregon Scientific td 339 dect in the language / languages: English as an attachment in your email.

The manual is 1,08 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info