526313
9
Zoom out
Zoom in
Previous page
1/13
Next page
EN
9
OR
b. Insert 4 type A screws into the
holes of the sensor connector.
Screw rmly into place, i.e. fence.
Align the wind vane at against the
small end of the sensor connector,
and then slide it until it clicks into
place to lock the cover.
IMPORTANT
Ensure that the wind
sensor is pointing north to enable it to
record accurate readings.
TEMPERATURE & HUMIDITY SENSOR
LW301/302
TIP Ideal placements for the sensor
would be in any location on the
exterior of the home at a height of not
more than 1.5 m (5 ft) and which can
shield it from direct sunlight or wet
conditions for an accurate reading.
Secure the sensor in the desired
location using the wall mount bracket
or table stand.
RAIN GAUGE
LW301
The rain gauge should be mounted horizontally about
1 meter (3 feet) from the ground in an open area away from
trees or other obstructions to allow rain to fall naturally for an
accurate reading.
To ensure a level plane:
Put a few drops of water on the cross
at the base of the funnel to check the
horizontal level.
Water will pool to the centre of the cross
when the rain gauge is level.
I
f water remains on 1-4, the gauge is
not horizontal.
If necessary, adjust the level using
the screw.
N
OTE For best results, ensure the base
is horizontal to allow maximum drainage
of any collected rain.
T
IP Erase all testing data from application
before formal use.
a
b
150cm(5ft)
1
23
4
1
23
4
LW301_UM_EN_R8.indd 9 2012/8/14 3:06:42 PM
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Oregon Scientific LW301 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Oregon Scientific LW301 in the language / languages: English as an attachment in your email.

The manual is 3,39 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Oregon Scientific LW301

Oregon Scientific LW301 User Manual - German - 6 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info