526313
8
Zoom out
Zoom in
Previous page
1/13
Next page
EN
8
2. On REG. STATION page, fill out
all elds (you can nd M
AC ADDR.
and REG
CODE at the bottom of the
Internet-connected hub).
3.
The map displays your location.
You can make a zoom by simply
tap-and-drag the map by your two
ngers at a time. Once you nd out the
specic location for your new station,
press and hold until a red pin appears on
the map. (Tap the red pin again, you can
see New
Station message pops up).
Tap DONE to conrm the selection.
4.
Once successful, LIVE page with
real-time weather data will pop up.
If application fails to connect to a
station, the display goes back to
REG.STATION page again.
NOTE
The default temperature and humidity data on
LIVE page is from your channel 1 of temperature and
humidity sensor.
N
OTE The weather icon represents the weather situation
for the next 12 hours, not the real-time situation.
N
OTE Please save a copy of your MAC ADDR. and
REG CODE for preventing the label faded or damaged
that cannot be recognized for registration in the future.
VERIFY CONNECTION
LW301/302
Before proceeding to install sensors outside, please verify
communication and transfer of data.
Enter M
Y WEATHER page, then tap HISTORY prole.
To search for a sensor:
Press and hold SEARCH (located at the back of the
weather sensor receiver).
N
OTE Unit will search only for already registered sensor
or new sensor reset within last 30 minutes. To register a
new sensor, reset sensor prior to search.
TIP
The transmission range may vary depending on
many factors. Sensors should be positioned in an open
area away from trees or other obstructions. Relocate your
sensor to various locations to have better reception.
MOUNTING / PLACING OF SENSORS
WIND SENSOR
LW301
Secure the sensor connector in the desired location:
a. Align the back of the sensor
connector to an existing pole.
Secure in place by inserting the
ends of the U-bolt into the holes on
the sensor connector and securing
it with washers and bolts.
a
b
LW301_UM_EN_R8.indd 8 2012/8/14 3:06:27 PM
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Oregon Scientific LW301 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Oregon Scientific LW301 in the language / languages: English as an attachment in your email.

The manual is 3,39 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Oregon Scientific LW301

Oregon Scientific LW301 User Manual - German - 6 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info