589268
7
Zoom out
Zoom in
Previous page
1/10
Next page
7
GB
HOW TO READ THE TEMPERATURE
TREND CHART
The temperature variance for CHANNEL 1 for the past 12 hours
is automatically scanned on the screen in six equal columns.
The variance is represented in rows of degrees C above or below
the current temperature at 0 Hr (current time) and 0°C (no vari-
ance).
HOW TO USE THE ICE WARNING
The ice warning is selected on the ICE WARNING slide switch
on the main unit. The warning only applies to CHANNEL 1.
To activate the warning, slide the switch to ON. When the tem-
perature recorded at CHANNEL 1 falls to between -2°C (28.4°F)
to +3°C (37.4°F) a beeping alarm will sound; the ice warning icon
[
] and current outdoor temperature will flash. The alarm will
sound every minute so long as the recorded temperature is within
alarm range. To stop the alarm, press any key or change the chan-
nel. Display features will continue to flash as a reminder that the
temperature remains within the ice warning range.
To deactivate the ice warning function, slide the ICE WARNING
switch to OFF.
NOTE ON °C AND °F
The unit of temperature display is selected on the °C/°F slide switch.
Select °C for Centigrade or °F for Fahrenheit.
Note that the remote temperature display on the main unit is domi-
nated by the selection on the °C/°F slide switch of the main unit.
Whatever the display units of the remote sensors are, they will be
automatically converted to the chosen one of the main unit.
LOW BATTERY WARNING
When it is time to replace batteries, the respective [ ] indicator
will show up when the corresponding channel is selected. The
battery level of the main unit will be shown on the indoor tempera-
ture when it is running low.
HOW TO USE THE TABLE STAND OR
WALL MOUNTING
Flip open the table stand to place the main unit on a flat surface. Or
you can flip close the stand and mount the unit on a wall using the
recessed hole.
As for the remote unit, it comes with a wall-mount holder and a
removable stand. Use either to hold the unit in place.
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Oregon Scientific JTR168LR at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Oregon Scientific JTR168LR in the language / languages: English as an attachment in your email.

The manual is 0,17 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Oregon Scientific JTR168LR

Oregon Scientific JTR168LR User Manual - French - 10 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info