Manual Oregon Scientific EW92 (page 6 of 95) (English, German, Dutch, French, Italian, Portuguese, Swedish, Spanish)

589235

Zoom out

Zoom in

1/95

4. Slide “°C/°F” switch to select between Celsius

and Fahrenheit.

5. Replace the battery door.

6. Press “+/CHANNEL” key to select the desired

channel.

Note When the sensor signal is received, the icon

“ ” will be displayed on the LCD.

OPERATING THE SENSOR

1. Remove the battery door and slide

“CHANNEL” switch to synchronize the channel

with receiver.

2. Insert 2 new AAA size batteries as per the

polarity information marked on the battery

compartment.

3. Press “RESET” key to restart the clock.

4. Replace the battery door.

Note

The transmission range may vary depending on

many factors. You may need to experiment with

various locations to get the best results.

Standard Alkaline batteries contain significant

amounts of water. Because of this they will freeze

in low temperatures of approximately -12°C (10°F).

Disposable Lithium batteries have a much lower

threshold for temperature with an estimated

freezing range of below -30°C (-22°F).

Wireless ranges can be impacted by a variety of

factors such as extremely cold temperatures.

Extreme cold may temporarily reduce the effective

range between the sensor and the base station. If

the unit’s performance fails due to low temperature,

the unit will resume proper functioning as the

temperature rises to within the normal temperature

range (i.e. no permanent damage will occur to the

unit due to low temperatures).

Main unit is searching for the sensor(s)

(the icon will be flashing)

The sensor(s) cannot be found

Sensor 1 has been found

(the icon will be displayed,

but won't flash)

The sensor(s) cannot be found after

operating the main unit for 60 minutes

and “--”

(Outdoor

temperature

Area)

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Oregon Scientific EW92 in the language / languages: English, German, Dutch, French, Italian, Portuguese, Swedish, Spanish as an attachment in your email.

The manual is 1,68 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Oregon Scientific EW92 Manual

Product: