796448

Oregon Scientific ESM200 Manual

12
Zoom out
Zoom in
Previous page
1/116
Next page
EN
10
* Alternative method to change units:
1. While in normal display, press MODE repeatedly to enter
GREENHOUSE GAS display.
2. Press and hold ADJUST repeatedly to change
measurement unit.
COST RATE
To determine the approximate cost of electricity consumption,
input the cost per KWh.
This unit allows the input of up to 4 different cost rates (Tariff)
to accommodate the different rates local utility companies
may charge consumers depending on the hour electricity is
consumed.
The icon will be displayed to remind users that
electricity used during that period will be charged at peak
rates.
There is also a built-in alarm to alert users when the
electricity cost per hour exceeds a pre-set limit.
By raising awareness of consumption behaviour, better
consumption habits may be adopted which will in turn reduce
the cost of electricity bills and impact on the environment.
To set cost rate:
1. Press and hold SET to enter Setting mode.
2. Press MODE repeatedly to navigate to sub setting
COST. Press SET to enter.
3. Press SET to enter TAR 1 setting.
4. Press SET to enter TIME setting.
5. Press ADJUST to change setting values.
6. Press SET to conrm and move to next setting. The
setting options are hour, minutes, rate, peak (yes / no)
and alarm (on /off).
NOTE If there is only one electricity rate for the entire
duration of the day, select OFF for TAR 2-4.
For other TAR 2-4 settings:
1. Press SET to enter TAR 2 setting.
2. Press ADJUST to select ON.
3. Repeat steps 4-6 above.
To exit Setting mode:
1. Press MODE repeatedly to navigate to END.
2. Press SET to exit and return to COST display.
If originally on upper line of display, repeat steps 1-2 to exit
completely.
Alternative method to enable /disable alarm:
• Press and hold MODE (when not in setting mode).
CLOCK AND CALENDAR
1. Press and hold SET to enter Setting mode.
2. Press MODE repeatedly to navigate to sub setting TIME.
Press SET to enter.
3. Press ADJUST to change setting values.
4. Press SET to conrm and move to next setting.
The setting options are hour format, hour, minutes.
5. Press SET to enter DATE menu options.
6. Press ADJUST to change setting values.
7. Press SET to conrm and move to next setting.
The setting options are date format, year, month, day.
8. Press MODE repeatedly to navigate to END. Press SET
to exit and return to COST display.
… 12 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Oregon Scientific ESM200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Oregon Scientific ESM200 in the language / languages: English, German, Dutch, French, Italian, Portuguese, Swedish, Spanish as an attachment in your email.

The manual is 8.39 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info