589221
6
Zoom out
Zoom in
Previous page
1/20
Next page
ESPAÑOL
ENGLISH
FRANÇAIS
DEUTSCH
PORTUGUÊS
DS8238 Manual-6 Lang (086-003006-019)
PORTUGUÊS ENGLISH
FRANÇAIS
DEUTSCH
ITALIANO
ITALIANO
ESPAÑOL
ATTACHING THE STRAP AND LENS CAP
SECURE DIGITAL (SD) AND MULTI-MEDIA CARD (MMC)
The Secure Digital (SD) and Multi-Media Card (MMC) are external memory cards
that can be plugged into your Digital Camera to extend the memory capacity. Please
refer to ( p.29) for the list of memory cards compatible with this digital camera.
When an external card is installed, will be displayed on the Status LCD.
It is recommended that all memory cards are formatted using the Format
option ( p.15) before using them with this digital camera. Memory cards
formatted using other devices may be incompatible.
When the SD card is installed, all images and movies taken are automatically
stored on the card. Images and movies in the internal memory cannot be
accessed until the card is removed.
The SD card will not insert fully into the slot if it is facing the wrong way. Be
careful not to apply undue force to the card.
Attaching the Strap Attaching the Lens Cap
1. Pass the short,
thin loop of the
strap through
the camera’s
strap hole.
2. Pass the
other end of
the strap through.
3. Tighten by
pulling the loop.
1. Pull the lens
cap cord through
the camera’s
strap hole.
2. Pass the lens
cap through the
loop.
3.Tighten by
pulling.
4. Fit the lens cap
onto the lens.
Removing Secure Digital /
Multi-Media Card
Installing Secure Digital /
Multi-Media Card
6 7
1. Turn off the
camera.
2. Open the
battery door.
3. Insert the card
following the
printed remark.
4. Close the
battery door.
1. Turn off the
camera.
2. Open the
battery door.
3. Press the
card to release.
4. Close the
battery door.
BASIC PHOTOGRAPH
QUICK START
1. Frame your subject in the viewfinder. The frame in the middle of the viewfinder
indicates the zone of automatic focusing. You can also view the subject on the
OSD ( p.8).
2. Press the Shutter Release Button.
3. The image taken is displayed on the OSD for approximately a second (Auto
Review).
4. Once the Auto Review has finished, you may proceed to take the next picture.
When memory is full, no more images can be stored. The camera will
beep and the words “Internal Memory Full” will appear on the LCD if
you press the Shutter Release Button.
When you have finished taking your pictures:
1. Turn to Mode Dial to Off.
2. Place the lens cover securely over the lens.
1. Remove the
lens cover from
the lens.
2. Turn the Mode
Dial to Camera
Mode.
3. Check the
battery indicator,
making sure
there is enough
power ( p.4).
1. Loop the strap
over your wrist.
2. Hold the camera
firmly.
3. Avoid blocking
the lens and flash.
4. Do not move nor
remain in motion
while taking
pictures. Use a
tripod if necessary
( p.27).
Preparing the camera Holding the camera
Taking Basic Pictures
Shutting Off the Camera
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Oregon Scientific DS8238 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Oregon Scientific DS8238 in the language / languages: English as an attachment in your email.

The manual is 0,73 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Oregon Scientific DS8238

Oregon Scientific DS8238 Quick start guide - English - 5 pages

Oregon Scientific DS8238 Quick start guide - French - 4 pages

Oregon Scientific DS8238 User Manual - French - 18 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info