589221
18
Zoom out
Zoom in
Previous page
1/20
Next page
ESPAÑOL
ENGLISH
FRANÇAIS
DEUTSCH
PORTUGUÊS
DS8238 Manual-6 Lang (086-003006-019)
PORTUGUÊS ENGLISH
FRANÇAIS
DEUTSCH
ITALIANO
ITALIANO
ESPAÑOL
30 31
No Power
Taking
Pictures
Power will not
turn on.
Power turns off
after turning on.
Cannot take
pictures when
the Shutter
Release Button
is pressed.
Flash does not go
off as expected.
Batteries are exhausted.
Batteries are inserted
incorrectly.
Battery level is too low.
Auto Off Function is
enabled.
Camera not turned on.
No space on the Secure
Digital card / Multi-Media
card / internal Memory.
Mode Switch is set to
Playback mode.
Flash is set to (no
flash)
Mode Switch is set to
Playback or Movie Mode.
Flash has not finished
charging.
Replace with new batteries.
Insert the batteries
correctly ( p.5).
Replace with new batteries
Disable the Auto Off
Function ( p.14).
Turn on the camera.
Delete unwanted files
( p.24) or insert a new
Secure Digital card / Multi-
Media card.
Change the Mode Switch
to Camera or Movie Mode.
Enable flash by changing
it to another setting ( p.9).
Change the Mode Switch
to Camera Mode.
Wait until the Status Lamp
stops blinking ( p.9).
Problem Symptom Check This Remedy
Super Fine (2048x1536)
Fine (1600x1200)
Normal (1280x1024)
Basic (640x480)
High
Quality
5
9
15
52
Standard
Quality
8
15
22
78
Economy
Quality
15
22
39
112
Resolution
Approximate Number of Pictures Stored under
the Following Picture Quality Selections
The above table is based on standard shooting conditions tested by Oregon
Scientific and may vary depending on the subject, shooting conditions,
capture modes, and SD card memory capacity.
TROUBLESHOOTING
Continued:
Problem Symptom Check This Remedy
Image taken
appears too dark
or blurred.
Cannot play back
images or movies.
Cannot delete
images or movies.
Picture not shown
on TV when
connected.
Camera does not
appear as
Removable Disk
when connected
to a PC.
OSD screen turns
blank. When mode
dial is switched, OSD
displays, Schedule
Shot in progress. Do
you want to stop it?
Check your Flash
Mode.
The subject is too far
away.
The lens is dirty.
Mode Switch is not set
to Playback Mode.
No images or movies
are recorded.
Images or movies are
protected.
Check cable connection.
Check channel on TV.
Camera or TV is not
turned on.
Check the USB cable
connection.
Camera is not turned on.
Camera switched to
Webcam Mode.
Camera still in
Schedule Shot mode
Turn on the flash by
changing the Flash Mode
( p.9).
Move closer to the
subject.
Clean the lens with a soft
cloth ( p.2).
Set Mode Switch to
Playback Mode.
Images located in internal
memory instead. Remove
Secure Digital card / Multi-
Media card ( p.6)
Unprotect the images or
movies ( p.24).
Make sure yellow video
cable is plugged into the
TV’s AV terminal.
TV channel should be
switched to the
appropriate AV channel.
Turn on the camera and
TV.
Make sure both ends of
the USB cable are
connected.
Turn the camera on.
Change the USB Mode
to Storage Mode ( p.15).
Confirm exiting the
Schedule Shot mode
Playback
Connecting
with
External
Devices
Camera
does not
switch off
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Oregon Scientific DS8238 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Oregon Scientific DS8238 in the language / languages: English as an attachment in your email.

The manual is 0,73 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Oregon Scientific DS8238

Oregon Scientific DS8238 Quick start guide - English - 5 pages

Oregon Scientific DS8238 Quick start guide - French - 4 pages

Oregon Scientific DS8238 User Manual - French - 18 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info