492720
16
Zoom out
Zoom in
Previous page
1/35
Next page
© Calibre UK Limited Issue 2.00 30 March 2012, W: www.calibreuk.com
T:+44 1274 394125 F: +44 1274 730960 E: techsupport@calibreuk..com 12
3.2.
Introduction
The front panel has keys for OSD menu navigation, input channel selection and often used functions.
OSD navigation is through two direction keys and a Menu/Enter key
.
HQView-500S/510/520
HQView-530
1 Standby key: When applying power to the unit it starts up. This is indicated by the green On LED
flashing. Once the unit is operational, the On LED is permanently on. By pressing the Standby Key, the
unit is put into standby mode. This is indicated by the red Standby LED being permanently on. The red
Keylocked LED indicates a keypad locking condition issued through the OSD menu. If a key on the
front panel is now pressed an OSD message comes up and displays the multiple key press to be
applied to unlock the front panel keys.
2 Input channel selection keys: All input channels can be directly selected. The active channel is
indicated by the red LED above the corresponding channel key being on.
3 PiP or Test Pattern key: A HQView-500S has a key to directly activate the PiP mode. The LED is
switched on when in PiP mode. HQView-510/520/530 have a key to directly activate a Test Pattern.
Use the up/down keys to toggle trough the available test patterns. The LED is switched on when in
Test Pattern mode.
4 OSD navigational keys: With the Menu key the OSD menu is activated.
HQView-500S/510/520: The up/down keys are used for OSD menu navigation. To exit the OSD menu
or any submenu press the up and down key simultaneously or navigate to the Exit item and press the
menu key. To access a submenu navigate to it and press the menu key. To apply a change go to the
menu item, press the menu key and make a parameter change with the up/down key. Confirm the
change by pressing the Menu key. This will also bring you back to the submenu.
HQView-530: A jog wheel is used for menu navigation and changing values instead of the up/down
keys. To exit the OSD menu or any submenu press the Back key or navigate to the Exit item and press
the menu key.
5a Direct function keys (HQView-500S/510/520 only): Contrast (gain), Black (offset/brightness),
Colour (saturation) and Hue can be altered directly from the front panel.
5b Front Panel LCD (HQView-530 only): The OSD is also shown on the LCD front panel.
6 Jog wheel: The wheel is used for navigating through the menu system and making value changes.
The jog wheel has a push function. Pushing the knob has the same effect as pushing the Menu key.
1
2
3
4
5a
1
2
3
4
5b
6
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Optoma HQView-500 Series at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Optoma HQView-500 Series in the language / languages: English as an attachment in your email.

The manual is 1,49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info