631680
13
Zoom out
Zoom in
Previous page
1/128
Next page
V 2.2.0t1b
Oplink Communications, Inc. 12
ii. Place the small unit on the movable door with the small unit aligned near
the top half of the large unit and not exceeding the recommended width
of a pencil or a quarter of an inch between the sensors for best
performance.
iii. The spacer is used in situations where the smaller piece needs to be
elevated to the larger piece to ensure proper contact.
b. On your window:
i. After selecting a location on the window, the large unit of the sensor
should be placed on the immovable window frame.
ii. Place the small unit on the movable window with the small unit aligned
near the top half of the large unit and not exceeding the recommended
width of a pencil or a quarter of an inch between the sensors for best
performance.
iii. The spacer is used in situations where the smaller piece needs to be
elevated to the larger piece to ensure proper contact.
4. When you open and close the doors and windows, the two parts should separate when
opened and then come back together when closed.
5. Verify that the two pieces are functional by noting that the LED on the sensor piece
blinks on/off when the parts are seperated. The LED on the sensor piece blinks on/off
again when the parts are placed together again.
*Note: If your door or window does not allow you to properly place the large unit of the
sensor on the frame, it is acceptable to place the smaller unit of the sensor on the frame to
make the placing easier. This is an acceptable approach to sensor placement, although it
should only be used when necessary.
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Oplink TripleShield at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Oplink TripleShield in the language / languages: English, German, Dutch, French, Spanish as an attachment in your email.

The manual is 1,26 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Oplink TripleShield

Oplink TripleShield Installation Guide - English - 17 pages

Oplink TripleShield User Manual - English - 27 pages

Oplink TripleShield Installation Guide - English - 1 pages

Oplink TripleShield Installation Guide - German, Dutch - 17 pages

Oplink TripleShield User Manual - Dutch - 26 pages

Oplink TripleShield Installation Guide - French, Italian, Spanish - 17 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info