424794

Opentel odt 4200 pvr Manual

5
Zoom out
Zoom in
Previous page
1/19
Next page
HARDWARE DESCRIPTION 8
HARDWARE DESCRIPTION7
4.A. FRONT PANEL
1) ANTENNA (A/B)
: This port is to connect the coaxial cable. The IF input is provided through this port and
the input frequency range is 174 ~ 862Mhz.
2) LOOP OUT (A/B)
:
This is used to connect your digital receiver to your TV set so that you can
still Watch analogue programs. (2,7,9,10 & SBS)
3) SERIAL PORT
:
This port is used for software upgrades when connected to your computer
through a serial cable.(Not Supplied)
4) TV SCART : This is used to connect your TV via Scart leads.
5) VCR SCART : This is used to connect your VCR via Scart leads.
(When you connect external sets to above two SCART sockets, always use fully featured SCART
cables)
6) S/PDIF DIGITAL OUTPUT : This is for connecting digital optical audio to devices such as
surround sound amplifiers.
7) VIDEO, AUDIO R/L : These RCA connectors are used to connect the digital receiver to any
external device with RCA inputs. (TV set, Video, Projetor etc)
8) ANT IN : To be looped from TV OUT when connecting the digital receiver via RF to your TV.
9) TV OUT : Used to connect the digital receiver via RF to your TV.
10) POWER INPUT : This cable is to be Plugged into the AC mains power outlet.
The input AC volts range is 90V to 240V, 50Hz/60Hz supply.
11)S-VIDEO : Used to connect the receiver via S-VIDEO to Input such as TV Sets.
4.B. REAR PANEL
4. HARDWARE DESCRIPTION
ANT IN
TV
VCR
S/PDIFS-VIDEO SERIAL PORT
R
L
TV OUT
ANTENNA
LOOP OUT
AC 100V-240V~
50Hz/60Hz
MAX.35W
VIDEO
AUDIO
1) POWER : This key is used to turn the receiver on and off (stand by).
2) CH : These keys are used to change the channels.
3) VOL : These keys are used to increase and decrease the volume
level manually.
4) INFRARED SENSOR : This is to receive the IR commands from the
RCU. Do not block the view of the sensor.
5) 7 SEGMENT DISPLAY : This SEGMENT display will show the current
channel number.While the receiver is in stand by mode, the display will show
the current time.
POWER
C H
VOL
INFRARED SENSOR
7 SEGMENT DISPLAY
6) LED DISPLAY: This LED display will show the current power mode status.
If receiver is in stand by mode,stand by mode LED will be on. and when
receiver is in on mode, on mode LED will be on.
(Option for LED display model only)
LED DISPLAY
STANDBY ON
… 5 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Opentel odt 4200 pvr at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Opentel odt 4200 pvr in the language / languages: English as an attachment in your email.

The manual is 0,39 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info