Free To Air / Common Interface Digital Satellite Receiver
TROUBLE SHOOTING
23
Free To Air / Common Interface Digital Satellite Receiver
MENU OPERATION
22
7. TROUBLE SHOOTING
Problem
Does not display LED on the
front panel or the receiver has no power.
No pictures on the screen
No sound
Remote Control does not operate
Poor picture quality
Searching Signal
Unrecognized smartcard
Please insert your smartcard
Solution
- Connect the power cord to the power outlet
properly.
- Check if the receiver is in standby mode.
- Check if the video output port is firmly
connected to the Tv.
- Check if you have selected the correct
channel or video output on your TV.
- Connect the audio cords properly.
- Check the volume level of the TV.
- Press MUTEkey.
- Point remote control directly towards the
receiver.
- Check and replace batteries.
- Check the signal strength in the Automatic
Channel Searchmenu
- If this is low, try adjusting the alignment of
your dish.
- Connect the antenna cable properly.
- Check the LNB. Please replace LNB if
necessary.
- Check the position of the dish. Please realign
dish if necessary.
- Check the signal strength in the Automatic
Channel Searchmenu.
- Check the smartcard.
- Insert the smartcard.
About the Receiver
On - Screen Error Messages
7. CHANNEL GUIDE
Press GUIDEkey, and the following screen will be displayed.It will give the titles of the current
and next programmes on different channels.
The information may include : current time / channel
name, name of the current and next programme, the
start and total time of the current programme, the start
and total time of the next programme.
Programme information will be available only when it is
included in the transmission.
When you press the
♬key, you can alternatively
select TV or radio channel guide.
Press the menukey or exitkey to return to previous
menu.
8. AUDIO
Press AUDIOkey.
Select the audio mode which you want using the left / rightkeys
Some programs are broadcasted with one or more alternative language soundtracks.
You can select the preferred audio language for soundtrack using the up/downkeys
To watch a specific channel, first select it by pressing the up / downkeys and the page
up / downkeys ( , ). Then, press OKkey. This enables you to move into that specific
channel.
You can also select a specific satellite using the SATkey. When you press the
♬key, you can
alternatively select TV or radio channel list. When you press F1key
you can see all channel list or FTA channel or favorite channel list.
Press the menukey or exitkey to return to previous menu.
▲
▲
▲
▲