645333
84
Zoom out
Zoom in
Previous page
1/96
Next page
84
Zone 2
—Continued
Controlling Zone 2 with the Remote
Controller
Note:
•To control Zone 2, you must press the remote control-
ler’s [ZONE 2] REMOTE MODE button first.
Adjusting the Volume for Zone 2
To Mute Zone 2:
Press the remote controller’s [ZONE 2] button, followed
by the [MUTING] button. To unmute Zone 2, press the
remote controller’s [ZONE 2] button again, followed by
the [MUTING] button, or adjust the volume for Zone 2.
Notes:
Only analog input sources are output by the ZONE 2
LINE OUT and ZONE 2 SPEAKERS terminals. Dig-
ital input sources are not output. If no sound is heard
when an input source is selected, check to see if it’s
connected to an analog input.
When the ZONE 2 SPEAKERS terminals are used,
listening modes that require surround back speakers,
such as Dolby Digital EX, DTS-ES, and THX Select2
Cinema, are unavailable.
While Zone 2 is on, the functions do not work.
•You can’t select different radio stations for the main
room and Zone 2. The same radio station will be used
for both.
1
Press the [ZONE 2] REMOTE
MODE button, then point the
remote controller at the AV
receiver and press the [ON] but-
ton.
Zone 2 turns on, and the ZONE 2 12V
TRIGGER OUT goes high (+12 V).
2
To select an input source for
Zone 2, press the [ZONE 2]
REMOTE MODE button, followed
by an INPUT SELECTOR button.
To select AM, FM, or XM, press the
[TUNER] INPUT SELECTOR button
repeatedly.
3
To turn off Zone 2, press the
[ZONE 2] REMOTE MODE button,
followed by the [STANDBY] but-
ton.
THX
10
--/---
11 12
REMOTE MODE
HDD
RECEIVER
TAPE/AMP
DVD CD
ZONE2
STEREO
SURR
DIRECT
SUBTITLEAUDIO
ALLST
PLAY MODE
VIDEO OFF
REPEAT
OPEN/CLOSE
Re-EQ
+
-
T
V CH
T
V VOL
LISTENING MODE
INPUT SELECTOR
32
MACRO
1
+
10 0
CLEAR
12
3
456
789
INPUT
I
ON STANDBY
T
V
CD
V1 V2 V3
MULTI CH
DVD
TUNER
PHONO
V4
TAPE
PURE A
TEST TONE
CH SEL LEVEL LEVEL
L NIGHT
RC-620M
ZONE2
ON
STANDBY
LEVEL–,
LEVEL+
INPUT
SELECTOR
ZONE2
ON
ZONE2
123
46
789
CD
V1
V4
V2 V3
DVD
TAPE
TUNER
+
10
PHONO
ZONE2
STANDBY
1
On the remote controller, press
the [ZONE 2] REMOTE MODE but-
ton, and then use the [LEVEL–]
and [LEVEL+] buttons.
On the AV receiver, use the ZONE
2 LEVEL [ ]/[ ] buttons.
If your Zone 2 speakers are connected
to an amp in Zone 2, use its volume
control to adjust the volume.
OFF TONEZONE 2
ZONE 2 LEVEL
PHONES
STEREO
DIMMER MEMORY
LISTENING MODE
TUNING
MODE
SETUP
PRESET PRESET
TUNING
RETURN
ENTER SETUP MIC
VIDEO
S VIDEO
DIGITAL
VIDEO 4 INPUT
AUDIOLR
CLEAR
STANDBY/ON
STANDBY
MASTER VOLUME
PHONO
ZONE 2
DISPLAY
PURE AUDIO
TUNERTAPE
VIDEO 4VIDEO 3VIDEO 2VIDEO 1
DVDMULTI CH CD
OFF
ON
POWER
ZONE 2 LEVEL ,
ZONE2
LEVEL LEVEL
ZONE 2 LEVEL
AV receiver
TX-SR803_En.book Page 84 Friday, August 26, 2005 9:26 AM
84


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Onkyo TX-SR703 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Onkyo TX-SR703 in the language / languages: English as an attachment in your email.

The manual is 5,08 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info