Manual Onkyo TX-SR702 (page 78 of 96) (English)

645308

Zoom out

Zoom in

1/96

Zone 2

—Continued

Here you can turn on Zone 2, select an input source, and

adjust the volume.

Note:

To control Zone 2 with the remote controller, you must

press the [ZONE 2] button ﬁrst.

Notes:

• If the Sleep function has been set, the Zone 2 compo-

nent will turn off along with the AV receiver when the

speciﬁed sleep time expires. To use the Sleep function

with Zone 2 only, set the Sleep function and then set

the AV receiver to Standby.

• Only analog input sources are output by the ZONE 2

LINE OUT and ZONE 2 SPEAKERS terminals. Dig-

ital input sources are not output. If no sound is heard

when an input source is selected, check if it’s con-

nected to an analog input.

• Since the Zone 2 function and the REC OUT outputs

use the same circuitry, if the [REC OUT] function is

used, Zone 2 will be turned off.

• While Zone 2 is being used, listening modes that need

surround back speakers (i.e., Dolby Digital EX, DTS-

ES, and THX Surround EX) are unavailable.

• While Zone 2 is on, functions will not work.

•You can’t select different radio stations for Zone 2 and

the main room. For example, if you an FM station for

the main room, that station will also be used in Zone 2.

Using Zone 2

Point the remote controller at the

AV receiver and press the

[ZONE 2] button followed by the

[ON] button.

This turns on Zone 2 and the AV

receiver’s 12V TRIGGER OUT.

To select the Zone 2 input source

with the remote controller, press

the [ZONE 2] button followed by

an input selector button.

If you select AM or FM, you can use

the remote controller’s [TUNER] but-

ton to select the band.

To perform steps 1 and 2 on the

AV receiver, press the [ZONE 2]

button, and then use the Control-

ler [ ]/[ ] buttons within ﬁve

seconds.

The name of the selected Zone 2 source

appears on the display.

1–4

ZONE

To set Zone 2 to the same source as the

main room, press the [ZONE 2] button,

and then use the Controller [ ]/[ ]

buttons to select “Zone 2 Sel: Source.”

To adjust the Zone 2 volume with

the remote controller, press the

[ZONE 2] button, and then use

the [LEVEL–] and [LEVEL+] but-

tons.

To do this on the AV receiver,

press the ZONE 2 [LEVEL] but-

ton, and then use the Controller

[ ]/[ ] buttons.

If the Zone 2 receiver/integrated amp is

connected to the AV receiver’s ZONE 2

LINE OUT L/R jacks, use the volume

control on the receiver/integrated amp.

To turn off Zone 2 with the

remote controller, press the

[ZONE 2] button followed by the

[STANDBY] button.

To do this from the AV receiver,

press the [ZONE 2] button, and

then use the Controller [ ]/[ ]

buttons to select OFF.

ZONE

LEVEL

ZONE

STANDBY

TX-NR702,602_En.book Page 78 Monday, July 26, 2004 11:05 AM

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Onkyo TX-SR702 in the language / languages: English as an attachment in your email.

The manual is 14,85 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Onkyo TX-SR702

Onkyo TX-SR702 User Manual - French, Spanish - 190 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Onkyo TX-SR702 Manual

Product: