645336
38
Zoom out
Zoom in
Previous page
1/64
Next page
38
En
Input Ch(Mono)
` L+R
:
Both the left and right channels are output.
` Left:
Only the left channel is output.
` Right:
Only the right channel is output.
Dolby Settings
PLIIx Music (2ch Input)
These settings apply to only 2-channel stereo sources.
If you’re not using any surround back speakers, these set-
tings apply to Dolby Pro Logic II, not Dolby Pro Logic
IIx.
Panorama
` On:
Panorama function on.
` Off
:
Panorama function off.
With this setting, you can broaden the width of the front
stereo image when using the Dolby Pro Logic IIx Music
listening mode.
Dimension
` –3 to 0 to +3
With this setting, you can move the sound field forward
or backward when using the Dolby Pro Logic IIx Music
listening mode. Higher settings move the sound field
backward. Lower settings move it forward.
If the stereo image feels too wide, or there’s too much
surround sound, move the sound field forward to
improve the balance. Conversely, if the stereo image
feels like it’s in mono, or there’s not enough surround
sound, move it backward.
Center Width
` 0 to 3
to 7
With this setting, you can adjust the width of the sound
from the center speaker when using the Dolby Pro
Logic IIx Music listening mode. Normally, if you’re
using a center speaker, the center channel sound is out-
put by only the center speaker. (If you’re not using a
center speaker, the center channel sound will be distrib-
uted to the front left and right speakers to create a phan-
tom center). This setting controls the front left, right,
and center mix, allowing you to adjust the weight of the
center channel sound.
PLIIz Height Gain
The Height Gain Control in Dolby Pro Logic IIz enables
the listener to select how much gain is applied to the front
high speakers. There are three settings, “Low”, “Mid” and
High”, and the front high speakers are accentuated in that
order. While “Mid” is the default listening setting, the lis-
tener may adjust the Height Gain Control to their personal
preference.
Height Gain
` Low:
Low PLIIz Height Gain becomes active.
` Mid:
Medium PLIIz Height Gain becomes active.
` High:
High PLIIz Height Gain becomes active.
Note
•If theFront High” setting is set to “None” ( 36), or “Front
High/Zone2 setting is set to Zone2 ( 40), this setting is
fixed at Mid and does not appear.
Dolby EX
This setting determines how Dolby EX encoded signals
are handled. This setting is unavailable if no surround
back speakers are connected. This setting is effective with
Dolby Digital, Dolby Digital Plus and Dolby TrueHD
only.
Dolby EX
` Auto:
If the source signal contains a Dolby EX flag, the
Dolby EX listening mode is used.
` Manual:
You can select any available listening mode.
Note
•If theSurrBack” Setting is set to “None” ( 36), this setting
cannot be selected.
•If theFront High” setting is set to other than “None”, this set-
ting is fixed at “Manual” ( 36).
•If theFront High/Zone2” setting is set to “Zone2” ( 40),
this setting is fixed at “Manual” and does not appear.
DTS Setting
Neo:6 Music
Center Image
` 0 to 2 to 5
The DTS Neo:6 Music listening mode creates 6-channel
surround sound from 2-channel stereo sources. With
this setting, you can specify by how much the front left
and right channel output is attenuated in order to create
the center channel.
Setting a value “0” in the middle is set to hear a sound.
Sound is spread in left and right (the outside) so that the
set value is made big. Please adjust by liking.
Audyssey Settings
Audyssey
` Off
:
No Audyssey EQ equalizing will apply.
` On:
Dynamic EQ” and “Dynamic Volume” become
available.
The Audyssey indicator will light ( 8).
The tone for each speaker is set automatically by
Audyssey 2EQ
®
Room Correction and Speaker Setup
function. Be sure to select on after having performed the
Room Correction and Speaker Setup ( 23).
38


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Onkyo TX-SR508 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Onkyo TX-SR508 in the language / languages: English as an attachment in your email.

The manual is 2,3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Onkyo TX-SR508

Onkyo TX-SR508 User Manual - German - 128 pages

Onkyo TX-SR508 User Manual - Dutch - 128 pages

Onkyo TX-SR508 User Manual - French - 128 pages

Onkyo TX-SR508 User Manual - Italian - 128 pages

Onkyo TX-SR508 User Manual - Swedish - 128 pages

Onkyo TX-SR508 User Manual - Spanish - 128 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info