645336

Onkyo TX-SR508 Manual

36
Zoom out
Zoom in
Previous page
1/64
Next page
36
En
Note
• When an HDMI IN is assigned to an input selector in “HDMI
Input” (➔ 35), this input assignment is automatically set to the
same HDMI IN. And in addition to the usual inputs (e.g.,
COAX1, COAX2, etc.), you can also select HDMI inputs.
• Available sampling rate for PCM signals from a digital input
(optical and coaxial) is 32/44.1/48/88.2/96 kHz/16, 20, 24 bit.
• If you connect a component (such as UP-A1 Dock that seated
iPod) to the UNIVERSAL PORT jack, you cannot assign any
input to PORT selector.
Menu Sp Config
Here you can check the settings made by Audyssey 2EQ
Room Correction and Speaker Setup function, or set them
manually, which is useful if you change one of the con-
nected speakers after using Audyssey 2EQ Room Correc-
tion and Speaker Setup function.
This section explains how to specify
which speakers are connected and their
sizes.
For speakers with a cone diameter
larger than 6-1/2 inches (16 cm), spec-
ify Large (full band). For those with a
smaller diameter, specify Small
(default crossover 100Hz).
The crossover frequency can be changed in the “Crossover
(Crossover Frequency)” (➔ 36).
Note
These settings are disabled when:
• a pair of headphones is connected, or
•the “Audio TV OUT” setting is set to “On” (➔ 41) and an input
selector other than HDMI is selected.
■ Subwoofer
` Ye s
:
Select if a subwoofer is connected.
` No:
Select if no subwoofer is connected.
■ Front
` Small:
` Large:
Select based on the cone diameter.
Note
•If the “Subwoofer” setting is set to “No”, this setting is fixed at
“Large” and does not appear.
■ Center
*1
, Surround
*1
, Front High
*1*2*4*5*7*8
,
SurrBack
*1*2*3*4*6*8
` Small:
` Large:
Select based on the cone diameter.
` None
*7
:
Select if no speaker is connected.
Note
*1
If the “Front” setting is set to “Small”, the “Large” option
cannot be selected.
*2
If the “Surround” setting is set to “None”, this setting cannot
be selected.
*3
If the “SurrBk/FrontHigh” setting is set to “Front High”
(➔ 40), this setting cannot be selected.
*4
If the “Speakers Type” setting is set to “Bi-AMP” (➔ 40),
this setting cannot be selected.
*5
If the “Front High/Zone2” setting is set to “Zone2” and
“SurrBk/FrontHigh” setting is set to “SurrBack” (➔ 40),
this setting cannot be selected.
*6
If the “Surround” setting is set to “Small”, the “Large”
option cannot be selected.
*7
For “Front High”, the default is “None”.
*8
If the “Front High/Zone2” setting is set to “Zone2”, this set-
ting cannot be selected.
■ SurrBack Ch
` 1ch:
Select if only one surround back speaker is con-
nected.
` 2ch
:
Select if two (left and right) surround back speakers
are connected.
Note
•If the “SurrBack” setting is set to “None”, this setting cannot be
selected.
■ Crossover (Crossover Frequency)
This setting is advantageous for the speakers that you
specified as “Small” in the “Sp Config (Speaker Configura-
tion)”
(➔ 36). To get the best bass performance from
your speaker system, you need to set the crossover fre-
quency according to the size and frequency response of
your speakers.
` 40Hz, 50Hz, 60Hz, 80Hz, 100Hz, 120Hz, 150Hz,
200Hz:
Use the diameter of the smallest speaker in your system
when choosing the crossover frequency.
*
Choose the setting suitable for the speaker.
Note
• For a more accurate setting, look up the frequency response in
the manuals supplied with your speakers and set accordingly.
• Choose a higher crossover frequency if you want more sound
from your subwoofer.
Sp Config (Speaker Configuration)
Some of the settings in this section are set automatically
by Audyssey 2EQ
®
Room Correction and Speaker
Setup function (➔ 23).
Cone diameter
Speaker cone diameter Crossover frequency
Over 8 in. (20 cm)
40/50/60 Hz
*
6-1/2 to 8 in. (16 to 20 cm) 80 Hz
5-1/4 to 6-1/2 in. (13 to 16 cm) 100 Hz
3-1/2 to 5-1/4 in. (9 to 13 cm) 120 Hz
Under 3-1/2 in. (9 cm)
150/200 Hz
*
… 36 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Onkyo TX-SR508 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Onkyo TX-SR508 in the language / languages: English as an attachment in your email.

The manual is 2,3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Onkyo TX-SR508

Onkyo TX-SR508 User Manual - German - 128 pages

Onkyo TX-SR508 User Manual - Dutch - 128 pages

Onkyo TX-SR508 User Manual - French - 128 pages

Onkyo TX-SR508 User Manual - Italian - 128 pages

Onkyo TX-SR508 User Manual - Swedish - 128 pages

Onkyo TX-SR508 User Manual - Spanish - 128 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info