645324
77
Zoom out
Zoom in
Previous page
1/100
Next page
77
Advanced Setup—Continued
LipSync
The AV receiver can be set to automatically correct any
delay between the video and the audio, based on the data
from the connected monitor.
Notes:
This function works only if your HDMI-compatible
TV supports HDMI Lip Sync.
You can check the amount of delay being applied by
the HDMI Lip Sync function on the A/V Sync screen
(see page 73).
xvColor
If your HDMI source and HDMI-compatible TV both
support the “x.v.Color,” you can enable “xvColor” on the
AV receiver with this setting.
Notes:
If the color is unnatural when “xvColor” is set to
“Enable”, change the setting to
“Disable”.
Refer to the connected component’s instruction
manual for details.
HDMI Ctrl (RIHD)
This function allows -compatible components
connected via HDMI to be controlled with the AV
receiver.
Notes:
, which stands for Remote Interactive over
HDMI, is the name of the system control function
found on Onkyo components. The AV receiver can be
used with CEC (Consumer Electronics Control),
which allows system control over HDMI and is part of
the HDMI standard. CEC provides interoperability
between various components, however, operation with
components other than -compatible
components cannot be guaranteed.
When set to “On” and close the menu, the name of
connected -compatible components and
“RIHD ON” are displayed on the AV receiver.
“Search…”
“(name)” “RIHD ON”
When the AV receiver cannot receive the name of the
component, it is displayed as “Player*” or
“Recorder*”, etc (“*” means the number of two or
more component).
When set to “Off” and close the menu, “RIHD OFF”
are displayed on the AV receiver.
“Disconnect”
“RIHD OFF”
•Set to Off when a connected piece of equipment is
not compatible or it is unclear whether the equipment
is compatible or not.
If movement is unnatural when set to
On, change the
setting to
Off.
Refer to the connected component’s instruction
manual for details.
Power Ctrl
To link the power functions of -compatible
components connected via HDMI, select “On”.
Notes:
The
“Power Ctrl” setting can be set only when the
above
“HDMI Ctrl (RIHD) setting is set to “On”.
HDMI power control only works with -
compatible components that support it and may not
work properly with some components due to their
settings or compatibility.
When set to “On”, power consumption will increase.
When set to “On”, regardless of whether the AV
receiver is On or on Standby, both audio and video
received by an HDMI input will be output by the
HDMI OUT for playback on the TV or other
component that’s connected to the HDMI OUT.
Refer to the connected component’s instruction
manual for details.
TV Ctrl
Set to “On” when you want to control the AV receiver
from an -compatible TV that is connected to
HDMI.
Notes:
•Set to
Off when the TV is not compatible or when it
is unclear whether the TV is compatible or not.
The “TV Ctrl” setting can be set only when the above
HDMI Ctrl (RIHD) and “Power Ctrl” settings are
both set to “On”.
Refer to the connected component’s instruction
manual for details.
Disable: HDMI lip sync disabled (default).
Enable: HDMI lip sync enabled.
Disable: “x.v.Color” disabled (default).
Enable: “x.v.Color” enabled.
Off: disabled (default).
On: enabled.
Off: Power Control disabled.
On: Power Control enabled.
Off: TV Control disabled.
On: TV Control enabled.
Note:
After changing the settings of the
“HDMI Ctrl
(RIHD)”
, “Power Ctrl”, or “TV Ctrl”, turn off the
power to all connected pieces of equipment and
then turn them on again. Refer to the User’s
Manuals for all connected pieces of equipment.
77


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Onkyo TX-SR507 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Onkyo TX-SR507 in the language / languages: English as an attachment in your email.

The manual is 9,83 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Onkyo TX-SR507

Onkyo TX-SR507 User Manual - German - 196 pages

Onkyo TX-SR507 User Manual - Dutch - 196 pages

Onkyo TX-SR507 User Manual - French - 200 pages

Onkyo TX-SR507 User Manual - Italian - 196 pages

Onkyo TX-SR507 User Manual - Swedish - 196 pages

Onkyo TX-SR507 User Manual - Spanish - 200 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info