645324
76
Zoom out
Zoom in
Previous page
1/100
Next page
76
Advanced Setup—Continued
This section explains items on the “Hardware Setup”
menu.
Note:
This procedure can also be performed on the AV receiver
by using its [SETUP] button, arrow buttons, and
[ENTER] button.
Remote Control
Remote ID
When several Onkyo components are used in the same
room, their remote ID codes may overlap. To
differentiate the AV receiver from the other components,
you can change its remote ID from 1, the default, to 2 or
3.
Note:
If you do change the AV receiver’s remote ID, be sure to
change the remote controller to the same ID (see below),
otherwise, you won’t be able to control it with the remote
controller.
Changing the Remote Controller’s ID
Tuner
FM/AM (North American/Taiwan models)
See “AM/FM Frequency Step Setup (not European
models)” on page 49.
AM Freq (Asian model)
See “AM/FM Frequency Step Setup (not European
models)” on page 49.
HDMI
AudioTVOut
This preference determines whether audio received at
the HDMI IN is output by the HDMI OUT. You may
want to turn this preference on if your TV is connected
to the HDMI OUT and you want to listen to the audio
from a component that’s connected to an HDMI IN,
through your TV’s speakers. Normally, this should be set
to “Off”.
Notes:
If
On is selected and the signal can be output by the
TV, the AV receiver will output no sound through its
speakers.
If “On” is selected, “TV Sp On” appears on the Dis-
play by pressing the [DISPLAY] button.
•When
TV Ctrl is set to “On”, this setting is set to
Auto.
With some TVs and input signals, no sound may be
output even when this setting is set to
On.
When the “AudioTVOut” setting is set to
On, or
TV Ctrl” is set to “On” and you’re listening through
your TV’s speakers (see page 25), if you turn up the
AV receiver’s volume control, the sound will be output
by the AV receiver’s front left and right speakers. To
stop the AV receiver’s speakers producing sound,
change the settings, change your TV’s settings, or turn
down the AV receiver’s volume.
Hardware Setup
1
Press the [RECEIVER] button followed by
the [SETUP] button.
2
Use the Up and Down [q]/[w] buttons to
select “7. HardwareSetup”, and then
press [ENTER].
3
Use the Up and Down [q]/[w] buttons to
select an item, and then press [ENTER].
4
Use the Up and Down [q]/[w] buttons to
select an item, and use the Left and Right
[e]/[r] buttons to change it.
The items are explained below.
5
When you’ve finished, press the
[SETUP] button.
Setup menu closes.
1
While holding down the [RECEIVER]
button, press and hold down the [SETUP]
button until the Remote Indicator lights up
(about 3 seconds).
2
Use the number buttons to enter ID 1, 2, or
3.
The Remote Indicator flashes twice.
Off: HDMI audio is not output (default).
On: HDMI audio is output.
76


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Onkyo TX-SR507 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Onkyo TX-SR507 in the language / languages: English as an attachment in your email.

The manual is 9,83 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Onkyo TX-SR507

Onkyo TX-SR507 User Manual - German - 196 pages

Onkyo TX-SR507 User Manual - Dutch - 196 pages

Onkyo TX-SR507 User Manual - French - 200 pages

Onkyo TX-SR507 User Manual - Italian - 196 pages

Onkyo TX-SR507 User Manual - Swedish - 196 pages

Onkyo TX-SR507 User Manual - Spanish - 200 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info