Manual Onkyo TX-SR494 (page 95 of 100) (English)

686346

Zoom out

Zoom in

1/100

Appendix

Front Panel≫ Rear Panel≫ Remote≫

Contents

≫

Connections

≫

Playback

≫

Setup

≫

About HDMI

Compatible functions

HDMI (High Denition Multimedia Interface) is a digital interface standard for

connecting TVs, projectors, Blu-ray Disc/DVD players, digital tuners, and other

video components. Several separate video and audio cables have been required

to connect AV components so far. With HDMI, a single cable can transmit control

signals, digital video and digital audio (2-channel PCM, multichannel digital audio,

and multichannel PCM).

HDMI CEC function:

By connecting a device that complies with CEC (Consumer Electronics Control)

of the HDMI standard using an HDMI cable, a variety of linked operations

between devices are possible. This function enables various linking operations

with players, such as switching input selectors interlocking with a player,

adjusting the volume of this unit using the remote controller of a TV, and

automatically switching this unit to standby when the TV is turned off.

The unit is designed to link with products that comply with the CEC standard,

however, linked operation is not always guaranteed with all CEC devices.

For linked functions to work properly, do not connect CEC-compliant devices

exceeding the connectable number to the HDMI jack as shown below.

• Blu-ray Disc/DVD players: up to 3 units

• Blu-ray Disc/DVD recorders: up to 3 units

• Cable TV tuner, terrestrial digital tuner, and satellite broadcasting tuner: up to

4 units

Operation has been conrmed on the following devices: (As of January 2019)

Toshiba brand televisions; Sharp brand televisions; Onkyo and Integra brand

RIHD-compatible players; Toshiba brand players and recorders; Sharp brand

players and recorders (when used with a Sharp brand television)

ARC (Audio Return Channel):

By connecting an ARC-compliant TV with a single HDMI cable, you can output

the audio and video from this unit to the TV, and also input the audio from the TV

to this unit.

HDMI Standby Through:

Even if this unit is in standby mode, the input signals from AV components can be

transmitted to the TV.

3D:

You can transmit 3D video signals from AV components to the TV.

4K:

This unit supports 4K (3840×2160p) and 4K SMPTE (4096×2160p) video signals.

Lip Sync:

This setting automatically corrects desynchronization between the video and

audio signals based on the information from the HDMI Lip Sync-compatible TV.

The HDMI jack of this unit conforms to the Revision 1.4 and Revision 2.2

standards of the HDCP (High-bandwidth Digital Content Protection), a copy

protection system for digital video signals. Other devices connected to the unit

must also conform to the HDCP standards.

Supported Audio Formats

2 ch linear PCM:

32 kHz, 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz, 192 kHz, 16/20/24 bit

Multi-channel linear PCM:

Maximum 7.1 channels, 32 kHz, 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz,

192 kHz, 16/20/24 bit

Bitstream:

Dolby Atmos, Dolby Digital, Dolby Digital Plus, Dolby TrueHD, DTS, DTS:X, DTS-

HD High Resolution Audio, DTS-HD Master Audio, DTS 96/24, DTS-ES, DTS

Express

DSD:

Supported sampling rates: 2.8 MHz

Your Blu-ray Disc/DVD player must also support the HDMI output of the above

audio formats.

I have connected my Onkyo receiver to my projector thru the HDMI out but have received the message "signal out of reach". My TV which is close to the av receiver works ok when using the HDMI out. The projector is on the ceiling in line with the ceiling speakers and they work Ok when the tv is used,
How do I correct this? Submitted on 6-1-2024 at 06:37
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Onkyo TX-SR494 in the language / languages: English as an attachment in your email.

The manual is 4,64 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Onkyo TX-SR494

Onkyo TX-SR494 User Manual - German - 102 pages

Onkyo TX-SR494 User Manual - Dutch - 101 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Onkyo TX-SR494 Manual

Product: