686346
74
Zoom out
Zoom in
Previous page
1/102
Next page
74
Bedienfeld Rückseite Fernbedienung
Inhalt
Verbindungen
Wiedergabe
Einrichtung
2. Crossover
Ändern Sie die Einstellungen der Crossover-Frequenzen.
Einstellpunkt Standardwert Einstelldetails
Front 100 Hz Wählen Sie eine Crossoverfrequenz von"40 Hz" bis
"200 Hz" aus, um die Ausgabe von Frequenzen für
jeden Kanal zu starten.
"Full Band": Die gesamte Bandbreite wird ausgegeben.
Wenn "Conguration" - "Subwoofer" den
Wert "No" aufweist, ist "Front" fest auf "Full
Band" eingestellt, und die niederfrequenten
Bereiche der anderen Kanäle werden über die
Frontlautsprecher ausgegeben. Informationen
zum Vornehmen dieser Einstellung nden Sie in
der Bedienungsanleitung Ihrer Lautsprecher.
Center 100 Hz Wählen Sie eine Crossoverfrequenz von"40 Hz" bis
"200 Hz" aus, um die Ausgabe von Frequenzen für
jeden Kanal zu starten.
"Full Band": Die gesamte Bandbreite wird ausgegeben.
• "Full Band" kann nur gewählt werden, wenn
"Front" auf "Full Band" eingestellt wurde.
Wenn eine Option nicht gewählt werden kann, obwohl
die Verbindung korrekt ist, überprüfen Sie, ob die
Einstellungen in "Conguration" - "Speaker Channels"
der Anzahl der angeschlossenen Kanäle entspricht.
Height 100 Hz Wählen Sie eine Crossoverfrequenz von"40 Hz" bis
"200 Hz" aus, um die Ausgabe von Frequenzen für
jeden Kanal zu starten.
"Full Band": Die gesamte Bandbreite wird ausgegeben.
• "Full Band" kann nur gewählt werden, wenn
"Front" auf "Full Band" eingestellt wurde.
• Wenn eine Option nicht gewählt werden kann,
obwohl die Verbindung korrekt ist, überprüfen
Sie, ob die Einstellungen in "Conguration"
- "Speaker Channels" der Anzahl der
angeschlossenen Kanäle entspricht.
Einstellpunkt Standardwert Einstelldetails
Surround 100 Hz Wählen Sie eine Crossoverfrequenz von"40 Hz" bis
"200 Hz" aus, um die Ausgabe von Frequenzen für
jeden Kanal zu starten.
"Full Band": Die gesamte Bandbreite wird ausgegeben.
• "Full Band" kann nur gewählt werden, wenn
"Front" auf "Full Band" eingestellt wurde.
Wenn eine Option nicht gewählt werden kann, obwohl
die Verbindung korrekt ist, überprüfen Sie, ob die
Einstellungen in "Conguration" - "Speaker Channels"
der Anzahl der angeschlossenen Kanäle entspricht.
Surround Back 100 Hz Wählen Sie eine Crossoverfrequenz von"40 Hz" bis
"200 Hz" aus, um die Ausgabe von Frequenzen für
jeden Kanal zu starten.
"Full Band": Die gesamte Bandbreite wird ausgegeben.
• "Full Band" kann nur gewählt werden, wenn
"Surround" auf "Full Band" eingestellt wurde.
Wenn eine Option nicht gewählt werden kann, obwohl
die Verbindung korrekt ist, überprüfen Sie, ob die
Einstellungen in "Conguration" - "Speaker Channels"
der Anzahl der angeschlossenen Kanäle entspricht.
LPF of LFE 120 Hz
Stellen Sie den Tiefpasslter für LFE-Signale (low-
frequency effect) ein, um nur Signale mit niedrigeren
Frequenzen als dem eingegebenen Wert zu übergehen
und somit unerwünschte Geräusche auszublenden. Der
Tiefpasslter ist nur an Quellen mit LFE-Kanal wirksam.
Es können Werte zwischen "80 Hz" und "120 Hz"
ausgewählt werden.
"Off": Wenn diese Funktion nicht verwendet wird
Double Bass On Dies kann nur gewählt werden, wenn
"Conguration" - "Subwoofer" auf "Yes" und "Front"
auf "Full Band" eingestellt wurden.
Die Bassausgabe wird verstärkt, indem Bassfrequenzen
des linken und rechten Frontlautsprechers sowie des
Center-Lautsprechers zum Subwoofer übertragen werden.
"On": Die Basswiedergabe wird verstärkt.
"Off": Die Basswiedergabe wird nicht verstärkt.
• Diese Funktion wird nicht automatisch
eingestellt, auch wenn die AccuEQ Room
Calibration durchgeführt wird.
74


Need help? Post your question in this forum.

Forumrules
1

Forum

onkyo-tx-sr494

Reset search

  • I have connected my Onkyo receiver to my projector thru the HDMI out but have received the message "signal out of reach". My TV which is close to the av receiver works ok when using the HDMI out. The projector is on the ceiling in line with the ceiling speakers and they work Ok when the tv is used,
    How do I correct this? Submitted on 6-1-2024 at 06:37

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Onkyo TX-SR494 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Onkyo TX-SR494 in the language / languages: German as an attachment in your email.

The manual is 4,63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Onkyo TX-SR494

Onkyo TX-SR494 User Manual - English - 100 pages

Onkyo TX-SR494 User Manual - Dutch - 101 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info