517568
87
Zoom out
Zoom in
Previous page
1/160
Next page
En-87
Operating
procedure
( page 61)
Controlling Other Components
Controlling Other
Components
You can use the AV receiver’s remote controller to
control your other AV components, including those
made by other manufacturers. This section explains
how to enter the remote control code for a component
that you want to control: DVD, TV, CD, etc.
See “Learning Commands” for learning commands
directly from another component’s remote controller
( page 94).
See “Using Normal Macros” for programming
ACTIVITIES to perform a sequence of remote control
actions ( page 95).
The following REMOTE MODE buttons are
preprogrammed with remote control codes for
controlling the components listed. You do not need to
enter a remote control code to control these
components.
For details on controlling these components, see the
indicated pages.
You can look up for an appropriate remote control
code from the on-screen menu.
Note
You need to connect your TV to the HDMI output (HDMI
OUT MAIN) to make the following on-screen setting.
You’ll need to enter a code for each component that
you want to control.
Preprogrammed Remote Control
Codes
BD/DVD Onkyo Blu-ray Disc player ( page 89)
TV/CD Onkyo CD player ( page 88)
STB/DVR Apple TV
Looking up for Remote Control Codes
1
Press RECEIVER followed by HOME.
2
Use e/r or q/w to select “Setup”, and then
press ENTER.
3
Use q/w to select “Remote Controller Setup”,
and then press ENTER.
4
Use q/w to select “Remote Mode Setup”, and
then press ENTER.
5
Use q/w to select a remote mode, and then
press ENTER.
The menu of category selection appears.
6
Use q/w to select a category, and then press
ENTER.
The keyboard screen for brand name input
appears.
7
Use q/w/e/r to select a character, and then
press ENTER.
Repeat this step for the first three characters of
the brand name.
When you have entered the 3rd character, select
Search” and press ENTER.
A list of brand names is retrieved.
If the desired brand name is not found:
Use r to select “Not Listed”, and then press
ENTER.
The keyboard screen for brand name input
appears.
8
Use q/w to select a brand, and then press
ENTER.
A remote control code with its instructions are
displayed. Follow the procedure.
9
If you can control the component, use q/w to
select “OK”, and then press ENTER.
The on-screen menu returns to the “Remote
Mode Setup” front screen.
If you cannot control the component, use q/w
to select “Try Next Code” and press ENTER.
The next code is displayed.
Entering Remote Control Codes
1
Look up the appropriate remote control code
in the separate Remote Control Codes list.
The codes are organized by category (e.g., DVD
player, TV, etc.).
2
While holding down the REMOTE MODE
button to which you want to assign a code,
press and hold down DISPLAY (about 3
seconds).
The REMOTE MODE button lights.
Note
Remote control codes cannot be entered for
RECEIVER and the multi zone button.
Only TV remote control codes can be entered for TV.
Except for RECEIVER, TV, and the multi zone button,
remote control codes from any category can be
assigned for the REMOTE MODE buttons. However,
these buttons also work as input selector buttons, so
choose a REMOTE MODE button that corresponds
with the input to which you connect your component.
For example, if you connect your CD player to the CD
input, choose TV/CD when entering its remote control
code.
87


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Onkyo TX-NR929 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Onkyo TX-NR929 in the language / languages: English as an attachment in your email.

The manual is 4,27 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Onkyo TX-NR929

Onkyo TX-NR929 Quick start guide - English - 4 pages

Onkyo TX-NR929 Quick start guide - German - 4 pages

Onkyo TX-NR929 User Manual - German - 160 pages

Onkyo TX-NR929 Quick start guide - Dutch - 4 pages

Onkyo TX-NR929 User Manual - Dutch - 160 pages

Onkyo TX-NR929 User Manual - French - 160 pages

Onkyo TX-NR929 User Manual - French - 4 pages

Onkyo TX-NR929 User Manual - Italian - 156 pages

Onkyo TX-NR929 Quick start guide - Italian - 4 pages

Onkyo TX-NR929 User Manual - Swedish - 160 pages

Onkyo TX-NR929 Quick start guide - Swedish - 4 pages

Onkyo TX-NR929 User Manual - Spanish - 160 pages

Onkyo TX-NR929 Quick start guide - Spanish - 4 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info