645307
91
Zoom out
Zoom in
Previous page
1/100
Next page
91
En
Can’t learn commands from another remote
controller
Can’t record
There’s no sound
The Zone 2 speakers produce no sound
Can’t access the server or Internet radio
Playback stops while listening to music files on
the server
Can’t connect to the AV receiver from a Web
browser
Can’t access the music files on a USB device
Stand-by power consumption
The sound changes when I connect my
headphones
The speaker distance cannot be set as required
The display doesn’t work
How do I change the language of a multiplex
source
To control an Onkyo component that’s not connected
via u, point the remote controller at the compo-
nent. Be sure to enter the appropriate remote control
code first.
82
The entered remote control code may not be correct.
If more than one code is listed, try each one.
When learning commands, make sure that the trans-
mitting ends of both remote controllers are pointing
at each other.
Are you trying to learn from a remote controller that
cannot be used for learning? Some commands can-
not be learned, especially those that contain several
instructions.
Recording
On your recorder, make sure the correct input is
selected.
To prevent signal loops and damage to the AV
receiver, input signals are not fed through to outputs
with the same name (VCR/DVR IN to VCR/DVR
OUT).
When the Pure Audio listening mode is selected,
recording is not possible because no video signals
are output. Select another listening mode.
Zone 2/3
Only components connected to analog inputs can be
played in Zone 2/3.
Powered Zone 2 cannot be used ifSpeakers
Type(Front)” is set to “Bi-Amp”.
45
To use the Zone 2 speakers, you must set the “Pow-
ered Zone2” setting to “Act”.
71
Music Server and Internet Radio
Check the network connection between the AV
receiver and your router or switch.
Make sure that your modem and router are properly
connected, and make sure they are both turned on.
Make sure the server is up and running and compati-
ble with the AV receiver.
65, 66
Check the “Network Settings”. 67
Make sure your server is compatible with the AV
receiver.
65, 66
If you download or copy large files on your com-
puter, playback may be interrupted. Try closing any
unused programs, use a more powerful computer, or
use a dedicated server.
If the server is serving large music files to several
networked devices simultaneously, the network may
become overloaded and playback may be inter-
rupted. Reduce the number of playback devices on
the network, upgrade your network, or use a switch
instead of a hub.
If you’re using DHCP, your router may not always
allocate the same IP address to the AV receiver, so if
you find that you can’t connect to a server or Internet
radio station, recheck the AV receiver’s IP address
on Network screen.
Check the “Network Settings”.
67
USB Mass Storage Device Playback
Make sure the USB device is plugged in properly.
The AV receiver supports USB devices that support
the USB mass storage device class. However, play-
back may not be possible with some USB devices
even if they conform to the USB mass storage device
class.
USB memory devices with security functions cannot
be played.
Others
In the following cases, the power consumption could
reach a maximum of 55W:
1. You are using the Universal Port jack.
2. Control” is set to “Enable” in the “Network
setting.
3. HDMI Control (RIHD)” setting is set to
On”. (Depending on the TV status, the AV
receiver will enter Standby mode as usual.)
56, 68,
76
When a pair of headphones is connected, the listen-
ing mode is set to Stereo, unless it’s already set to
Stereo, Mono, Direct, or Pure Audio.
In some cases, corrected values suitable for home
theater use may be set automatically.
The display is turned off when the Pure Audio listen-
ing mode is selected.
Use the “Multiplex” setting on the “Audio Adjust
menu to select “Main” or “Sub”.
49
91


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Onkyo TX-NR808 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Onkyo TX-NR808 in the language / languages: English as an attachment in your email.

The manual is 4,41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Onkyo TX-NR808

Onkyo TX-NR808 User Manual - German - 196 pages

Onkyo TX-NR808 User Manual - Dutch - 196 pages

Onkyo TX-NR808 User Manual - French - 200 pages

Onkyo TX-NR808 User Manual - Italian - 196 pages

Onkyo TX-NR808 User Manual - Swedish - 196 pages

Onkyo TX-NR808 User Manual - Spanish - 200 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info