Manual Onkyo TX-NR808 (page 45 of 100) (English)

645307

Zoom out

Zoom in

1/100

Digital Audio Input

If you connect a component to a digital audio input, you

must assign that input to an input selector. For example, if

you connect your CD player to the OPTICAL IN 1, you

must assign “OPT1” to the “TV/CD” input selector.

Here are the default assignments.

■ BD/DVD, VCR/DVR, CBL/SAT, GAME, PC,

TV/CD, PHONO, PORT

` COAX1, COAX2, COAX3, OPT1, OPT2:

Select a corresponding digital audio input that the

component has been connected.

` -----:

Select if the component is connected to an analog

audio input.

•“AUX” is used only for input from the front panel.

Note

•When an HDMI IN is assigned to an input selector in “HDMI

Input” (➔ 43), the same HDMI IN will be set as a priority in this

assignment. In this case, if you want to use the coaxial or optical

audio input, make the selection in the Audio Selector in the

Home menu.

• Available sampling rate for PCM signals from a digital input

(optical and coaxial) is 32/44.1/48/88.2/96 kHz/16, 20, 24 bit.

• If you connect a component (such as UP-A1 Dock that seated

iPod) to the UNIVERSAL PORT jack, you cannot assign any

input to “PORT” selector.

Analog Audio Input

Some DVD players output the LFE channel from their

analog subwoofer output at 15 dB higher than normal.

With this setting, you can change the AV receiver’s sub-

woofer sensitivity to match your DVD player.

■ Subwoofer Input Sensitivity

` 0dB

to 15dB in 5 dB step.

Note

• This setting only affects signals connected to the AV receiver’s

multichannel input SUBWOOFER jack.

• If you find that your subwoofer is too loud, try the 10 dB or

15 dB setting.

Main menu Speaker Setup

Here you can check the settings made by

Audyssey MultEQ Room Correction and Speaker Setup

function, or set them manually, which is useful if you

change one of the connected speakers after using

Audyssey MultEQ Room Correction and Speaker Setup

function.

Note

• These settings are disabled when:

– a pair of headphones is connected, or

–the “Audio TV Out” setting is set to “On” (➔ 56) and an

input selector other than HDMI is selected.

Speaker Settings

If the impedance of any speaker is 4 ohms or more but less

than 6, set the minimum speaker impedance to 4 ohms.

If you bi-amp the front speakers, you must change the

“Speakers Type(Front)” setting (➔ 45).

For hookup information, see “Bi-amping the Front Speak-

ers” (➔ 15).

Note

• When bi-amping is used, the AV receiver is able to drive up to

5.1 speakers in the main room.

• Before you change these settings, turn down the volume.

■ Speaker Impedance

` 4ohms:

Select if the impedance of any speaker is 4 ohms or

more but less than 6.

` 6ohms

Select if the impedances of all speakers are between

6 and 16 ohms.

■ Speakers Type(Front)

` Normal

Select this if you’ve connected your front speakers

normally.

` Bi-Amp:

Select this if you’ve bi-amped your front speakers.

Note

• Powered Zone 2 cannot be used if “Speakers Type(Front)” is

set to “Bi-Amp” (➔ 71).

■ Powered Zone 2

See “Setting the Powered Zone 2” (➔ 71).

Input selector Default assignment

BD/DVD COAX1

VCR/DVR COAX2

CBL/SAT COAX3

GAME OPT1

PC -----

AUX FRONT (Fixed)

TUNER ----- (Fixed)

TV/CD OPT2

PHONO -----

PORT -----

Speaker Setup

Some of the settings in this section are set automatically

by Audyssey MultEQ

Room Correction and Speaker

Setup function (➔ 28).

If you change these settings, you must run

Audyssey MultEQ Room Correction and Speaker

Setup again (➔ 28).

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Onkyo TX-NR808 in the language / languages: English as an attachment in your email.

The manual is 4,41 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Onkyo TX-NR808

Onkyo TX-NR808 User Manual - German - 196 pages

Onkyo TX-NR808 User Manual - Dutch - 196 pages

Onkyo TX-NR808 User Manual - French - 200 pages

Onkyo TX-NR808 User Manual - Italian - 196 pages

Onkyo TX-NR808 User Manual - Swedish - 196 pages

Onkyo TX-NR808 User Manual - Spanish - 200 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Onkyo TX-NR808 Manual

Product: