553769
93
Zoom out
Zoom in
Previous page
1/97
Next page
93
Troubleshooting Guide—Continued
“Not available with headphones use”
Operation not allowed because headphones are plugged
into the TX-NR801/TX-NR801E.
“Not available with Multichannel use”
Operation not allowed while the multichannel output is
being used.
“Not available in this Sp Config”
Will not work with the current speaker configuration
settings.
“Not available in Zone 2 mode”
Setting not allowed because the Zone 2 mode is turned
on.
“Only available with Dolby D”
No setting other than Dolby Digital can be set.
“Not available in this Listening mode”
Will not work with the current listening mode.
“Not available with this signal”
The listening mode cannot be selected with the current
input source.
“Not available in Pure Audio mode”
Will not work with the Pure Audio mode.
“Surr Back/Zone 2 setting is Surr Back”
Operation not allowed because the setting is Surr Back.
“Surr Back/Zone 2 setting is Zone 2”
Operation not allowed because the setting is Zone 2.
“Not available with Muting”
Operation not allowed because the muting is activated.
“Zone 2 is not On”
Will not work because Zone 2 has not been turned on.
Also refer to the respective instruction manuals of the
CD player, DVD player, video cassette recorder, TV
monitor, etc., that comprise your entertainment system.
The TX-NR801/TX-NR801E contains an internal
microcomputer that performs high-level operations.
However, on extremely rare occasions, noise or interfer-
ence from an external source or static electricity may
cause faulty operation. If this occurs, unplug the power
cord from the wall outlet, wait five or more seconds, and
then plug it back in. This should correct the situation.
* To reset the surround mode and other settings to the
factory default settings, hold down the VIDEO 1 but-
ton with the TX-NR801/TX-NR801E turned on and
then press the STANDBY/ON button. “CLEAR”
appears in the front display and the TX-NR801/
TX-NR801E enters the standby state.
If One of the Messages Shown Below
Appears
93


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Onkyo TX-NR801 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Onkyo TX-NR801 in the language / languages: English as an attachment in your email.

The manual is 5,3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info