553769
92
Zoom out
Zoom in
Previous page
1/97
Next page
92
Troubleshooting Guide—Continued
Symptoms Causes Remedies
NET AUDIO
Selecting the “Music
Server” fails to play music
or fails to connect to the
server.
Your PC is not turned on, or Net-Tune
Central is not running.
Turn on your PC, and start Net-Tune Central.
No audio files found on the server.
Create MP3, MWA, and/or WAV audio files on
your PC, and use Net-Tune Central to create the
list of audio files saved on your PC.
The network is down because of some
failures.
Turn off the power of the TX-NR801/TX-NR801E
and turn it on again (When the TX-NR801/
TX-NR801E is without a power switch, unplug the
power cord and plug it in again).
If this does not resolve the problem, reboot the PC
running the Net-Tune Central server.
The NTSP Port setting on the TX-NR801/
TX-NR801E differs from that of Net-
Tune Central.
Go to “5-4. Client Setup Sub-menu,” select “c.
NTSP Port,” then set the same value as used for
Net-Tune Central (See page 74).
Search by album returns
no match.
The audio file list of Net-Tune Central
contains no files that have album names.
Assign album names to the files contained in the
audio file list of Net-Tune Central.
Search by artist returns no
match.
The audio file list of Net-Tune Central
contains no files that have artist names.
Assign artist names to the files contained in the
audio file list of Net-Tune Central.
Search by genre returns no
match.
The audio file list of Net-Tune Central
contains no files that have genre names.
Assign genre names to the files contained in the
audio file list of Net-Tune Central.
No playlist can be selected.
You have not yet created any playlists in
Net-Tune Central.
Create playlists in Net-Tune Central.
The Net Audio information
is not displayed.
Depending on the model’s shipping destina-
tion, the information on NET AUDIO and
Immediate Display may not be displayed
when the component video signal is output.
Set the Component Video setting to “VIDEO” at
Input Setup Menu Video Setup Sub-Menu.
REMOTE CONTROLLER
Front panel controls func-
tion but remote controller
controls do not.
No batteries in remote controller. Insert batteries (See page 7).
Batteries are dead. Replace batteries (See page 7).
Remote controller is not pointed at the remote
sensor of the TX-NR801/TX-NR801E.
Point the remote controller at the remote sensor of
the TX-NR801/TX-NR801E (See page 7).
Remote controller is too far from the
TX-NR801/TX-NR801E.
Operate the remote controller within 16 feet (5
meters) (See page 7).
Remote controller is functioning in a dif-
ferent mode.
Press the RCVR MODE button.
OTHER
LATE NIGHT function
cannot be used.
Playback source is not Dolby Digital
encoded.
Check that the DOLBY DIGITAL indicator lights
up on the display (See page 55).
Re-EQ function cannot be
used.
Re-EQ may not be able to be set due to
current listening mode.
Select different listening mode (See page 55).
Desired parameter cannot
be set.
Parameter may not be able to be set due to
current listening mode.
Check settings in Audio Adjust Menu (See pages
57 to 61).
Multichannel audio is not
output.
The Multichannel setting is set to “No.
Set the Multichannel setting to “Yes” at Setup
Menu Input Setup Menu Multichannel
Setup Sub-menu (See page 64).
Input source is not connected to MULTI
CH INPUT port.
Check connections (See page 64).
Components in remote
zone (Zone 2) do not oper-
ate properly.
Components are incorrectly connected. Check connections (See page 66).
Objects are interfering with remote con-
troller signals.
Move inferring objects away from path of remote
controller signals.
Sound is sometimes heard
and sometimes not heard
with digital sources.
One digital input format has been speci-
fied so other digital formats are not
played.
Select “All” at Setup Menu Input Setup Menu
Digital Setup Sub-menu Digital Format
(See page 37).
Noise during playback or
skipping of the beginning
sounds occurs with DTS
sources, PCM sources and
other digital sources.
When “All” is set for the digital format
setting, time is required to change formats
when different sources are played.
Try specifying the format you are playing at Setup
Menu Input Setup Menu Digital Setup Sub-
menu Digital Format (See page 37).
The unit cannot be
switched to Dolby EX or
DTS-ES mode.
“Surr Back/Zone 2” is set to “Zone 2.
Change the Hardware Setup Surr Back/Zone 2
Sub-menu setting to Surr Back (See page 30).
92


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Onkyo TX-NR801 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Onkyo TX-NR801 in the language / languages: English as an attachment in your email.

The manual is 5,3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info