553769
40
Zoom out
Zoom in
Previous page
1/97
Next page
40
Enjoying Music or Videos with the TX-NR801/TX-NR801E—Continued
Temporarily Changing the Speaker Output
Levels
To change the individual speaker volumes temporarily,
follow the procedure given below. Each channel can be
set between –12 and +12 decibels (between –15 and
+12 decibels for the subwoofer). Note that the speaker
volumes will return to the original settings when the
TX-NR801/TX-NR801E is put in the standby state.
Notes:
You cannot select a speaker if it is set to “No” or
“None” in the Speaker Config Sub-menu of the
Speaker Setup Menu.
To have your new speaker levels set here, overwrite
the settings at Setup Menu Speaker Setup Menu
Level Calibration Sub-menu, and press the TEST
button after you complete step 3 in the procedure
above.
Using the Sleep Timer (remote controller only)
With the sleep timer you can set the TX-NR801/
TX-NR801E so that it automatically turns off after a set
period.
Adjusting the brightness of the front display
You can adjust the brightness of the front display of the
TX-NR801/TX-NR801E using the DIMMER button on
the remote controller or on the TX-NR801/TX-NR801E
front panel (other than European models).
1
Press the RCVR MODE button.
2
Press the CH SEL button and
select the desired speaker.
3
Press the LEVEL or button to
adjust the volume level.
DSP
A
-
FO
RM LISTENING MODE MEMORY
THX
SURROUNDDIRECT
/
PURE AUDIO STEREO
FM
MODE
MEMORY
ENTER
RE
TURN
SETUP
TUNING
PRESET
DISPLAY DIMMER
AUDIO SELECTOR
TEST
RCVR
SLEEP
DISPLAY
DIMMER
CH SEL
AUDIO SEL
LEVEL
/
Press the [SLEEP] button repeat-
edly to select the required sleep
time.
You can set the sleep time from 90 to 10
minutes in 10 minute increments.
The SLEEP indicator appears on the dis-
play when the sleep timer has been set,
as shown. The specified sleep time
appears on the display for about five sec-
onds, then the previous display reap-
pears.
To cancel the sleep timer, press the
[SLEEP] button repeatedly until the
SLEEP indicator disappears.
To check the remaining sleep time,
press the [SLEEP] button. Note that if
you press the [SLEEP] button while the
sleep time is being displayed, you’ll
shorten the sleep time by 10 minutes.
Using the sleep timer only for Zone 2:
If you are using the remote zone (Zone
2), it will turn off at the same time as the
main zone. If you want to set the sleep
function for Zone 2 only, set the sleep
function with main zone turned on and
then put the main zone into the standby
state.
Use the DIMMER button to select:
dim, dimmer, or normal
brightness.
Remote
controller
DIMMER
TX-NR801/
TX-NR801E
Remote
controller
40


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Onkyo TX-NR801 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Onkyo TX-NR801 in the language / languages: English as an attachment in your email.

The manual is 5,3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info