553769
38
Zoom out
Zoom in
Previous page
1/97
Next page
38
Conguring Input Settings Suitable for Your Connections—Continued
Video Setup Sub-menu
When the default input settings does not suit your con-
nection, perform the following procedures to configure
your input settings.
a. Video
This setting allows you to match the audio from one
component with the video from another. Therefore, you
can set a video source to be displayed while the audio
from another input source is heard. For example, this
allows you to play the music from a compact disc, while
displaying the picture from a video cassette player or
other video source.
The default settings are given below.
The settings in this sub-menu apply to the video and S
video signals. Available options for the video source to
be displayed are “DVD,” “VIDEO 1” to “VIDEO 5,
“Last Valid” and “----.
DVD, VIDEO 1-5: Select either the video signal from
the VIDEO or S VIDEO terminal for each video input.
Last Valid: Select to have the video of the previous
input source continued. For example, if the selected
input source is VIDEO 1, and you then change to CD
(set to “Last Valid”), then the audio from the CD input
is played while the video from VIDEO 1 continues.
----: Set this option when you do not want any video
inputs to be displayed.
b. Component Video
Use this setting if you connect monitors like TV to the
COMPONENT VIDEO OUTPUT jacks on the
TX-NR801/TX-NR801E.
The default settings are given below.
For example, when you connect the DVD player to the
COMPONENT VIDEO INPUT 2 jacks, select “DVD”
as input source and set “b. Component Video” to
“INPUT 2.
Available component video inputs are “INPUT 1,
“INPUT 2,” “VIDEO*,” “Last Valid,” and “None*.
INPUT 1: The video signals from devices connected to
the INPUT 1 of the COMPONENT VIDEO input banks
are used.
INPUT 2: The video signals from devices connected to
the INPUT 2 of the COMPONENT VIDEO input banks
are used.
VIDEO*: The video signals assigned in the “a. Video”
sub-menu setting are used. This option is useful when
no devices are connected to the INPUT 1 and INPUT 2
of the COMPONENT VIDEO input banks.
Last Valid (enables the source last selected): Select to
have the video of the previous input source continued.
None*: No video signals are assigned. When you select
“None,” the OSD screen disappears. If you want to
change this setting later on, use the front panel display
on the TX-NR801/TX-NR801E.
*Valid only when the PAL format is used in an area other than
USA, Canada and Australia.
Note (When the model is for USA, Canada or Austra-
lia and its TV format is PAL):
When the component video signal is output, the infor-
mation on the NET AUDIO and Immediate Display (see
page 63) will not be displayed.
Input source selected Multichannel
CD No
PHONO No
TUNER No
TAPE No
DVD Yes
VIDEO 1 No
VIDEO 2 No
VIDEO 3 No
VIDEO 4 No
VIDEO 5 No
Input source selected Video
CD Last Valid
PHONO Last Valid
TUNER Last Valid
TAPE Last Valid
DVD DVD
VIDEO 1 VIDEO 1
VIDEO 2 VIDEO 2
VIDEO 3 VIDEO 3
VIDEO 4 VIDEO 4
VIDEO 5 VIDEO 5
NET AUDIO Last Valid
2-3.Video Setup
a.Video
:DVD
b.Component Video
:INPUT1
Quit:[SETUP]
Input:DVD
Input source selected Component video input
CD Last Valid
PHONO Last Valid
TUNER Last Valid
TAPE Last Valid
DVD INPUT 1
VIDEO 1 INPUT 2
VIDEO 2 INPUT 2
VIDEO 3 INPUT 2
VIDEO 4 INPUT 2
VIDEO 5 INPUT 2
NET AUDIO Last Valid
38


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Onkyo TX-NR801 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Onkyo TX-NR801 in the language / languages: English as an attachment in your email.

The manual is 5,3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info