553769
31
Zoom out
Zoom in
Previous page
1/97
Next page
31
Selecting the Appropriate Setting for Your Connections—Continued
a. Surr Back/Zone 2
Zone 2: Select when connecting the speakers for the
remote zone (Zone 2) to the SURR BACK/ZONE 2
PRE OUT or SURR BACK/ZONE 2 SPEAKERS
terminals (for using the internal amplifier for Zone 2).
Surr Back (default): Select when not connecting
the speakers for the remote zone (Zone 2) to the
SURR BACK/ZONE 2 PRE OUT or SURR BACK/
ZONE 2 SPEAKERS terminals (for using the
internal amplifier for the surround back speakers).
Note:
The SURR BACK/ZONE 2 PRE OUT and SURR
BACK/ZONE 2 SPEAKER terminals
In order to have 7.1 channel playback in the main room,
you must set the Surr Back/Zone 2 setting to “Surr
Back.” When set to “Surr Back,” the surround back
signals are output from the SURR BACK/ZONE 2 PRE
OUT and SURR BACK/ZONE 2 SPEAKER terminals.
Connect the surround back speakers to the SURR
BACK/ZONE 2 SPEAKER terminals or to the speakers
terminals of the power amplifier connected to the SURR
BACK/ZONE 2 PRE OUT terminals.
When you are not using the surround back speakers in
the main room and are using the internal amplifier to
power the speakers for the remote zone (Zone 2), set the
Surr Back/Zone 2 setting to are “Zone 2.” When set to
“Zone 2,” the Zone 2 signals are output from the SURR
BACK/ZONE 2 PRE OUT and SURR BACK/ZONE 2
SPEAKER terminals. Connect the remote zone (Zone 2)
speakers to the SURR BACK/ZONE 2 SPEAKER
terminals or to the speaker terminals of the power
amplifier connected to the SURR BACK/ZONE 2 PRE
OUT terminals.
At this time, the main room is switched to 5.1 channel
playback mode, and therefore you cannot select the THX
Surround EX, Dolby Digital EX or DTS-ES, which
requires the surround back speakers.
Remote Setup Sub-menu
Use this sub-menu when you have a remote control
sensor connected to the IR IN terminal. The setting in
this sub-menu tells the TX-NR801/TX-NR801E
whether the remote control sensor is being used for
operation of the TX-NR801/TX-NR801E in the main
zone or the remote zone (Zone 2).
a. Position
Main: Select when you are using the remote control
sensor for operation with the remote controller in the
main zone.
Zone 2: Select when you are using the remote
control sensor for operation with the remote
controller in the remote zone (Zone 2).
OSD Setup
a. TV Format (For all models other than USA and
Canadian models)
When you want to reconfigure the settings conforming
to the television format used for the area where you use
the TX-NR801/TX-NR801E, use this sub-menu so that
no time is wasted on detection.
Auto: This is the default setting. When you leave
this setting unchanged, the television format is
detected and automatically set by the TX-NR801/
TX-NR801E.
PAL: Use this setting when you know that the televi-
sion format is PAL.
NTSC: Use this setting when you know that the tele-
vision format is NTSC.
AM Frequency Step Sub-menu
(Worldwide model Only)
This sub-menu only appears on the worldwide model.
The setting in this sub-menu determines the incremental
or decremental amount when adjusting the AM tuner
frequency. The initial setting is 9 kHz, and this needs
only to be changed if you are using the TX-NR801/
TX-NR801E in a 10 kHz region.
a. Frequency Setup
9 kHz: Select when you use the TX-NR801/
TX-NR801E in North America.
10 kHz: Select when you use the TX-NR801/
TX-NR801E in other than USA and Canada.
0-3.Remote Setup
a.Position :Main
Quit:[SETUP]
0-4.TV Format
a.TV Format
:Auto
Quit:[SETUP]
0-5.AM Frequency Step
a.Frequency Step
:9 kHz
Quit:[SETUP]
31


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Onkyo TX-NR801 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Onkyo TX-NR801 in the language / languages: English as an attachment in your email.

The manual is 5,3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info