553769
30
Zoom out
Zoom in
Previous page
1/97
Next page
30
Selecting the Appropriate Setting for Your Connections
In this section, you will perform the initial settings for
the following scenarios.
When the impedances for speakers connected to the
TX-NR801/TX-NR801E are between 4 and 6 (See
page 18).
When connecting speakers to the ZONE 2
SPEAKERS terminals (See page 66).
When operating the remote controller using the IR IN
terminal (See page 69).
When you want to fix the TV Format setting to PAL or
NTSC.
When you want to fix the AM Frequency Step setting
to 9 kHz or 10 kHz.
Note:
The settings within the Hardware Setup Menu will need
to be made before you use your TX-NR801/
TX-NR801E for the first time. Once you have selected
one of the Hardware Setup menu items, the setting will
not be displayed again when you enter the Basic Menu.
To change the setting at a later date, select the Advanced
Menu to display the Hardware Setup Menu.
If you want to perform these operations using the remote
controller, first press the RCVR button.
Speaker Impedance Sub-menu
Use this sub-menu to set the impedance level of the
TX-NR801/TX-NR801E to match the specifications of
the speakers you are using.
a. Minimum
6 ohms (default): Select when the impedances of all
speakers are between 6 and 16 .
4 ohms: Select when the impedance of even one
speaker is between 4 and 6 .
Note:
Before you change this setting, be sure to first lower the
volume at the TX-NR801/TX-NR801E to the minimum
level.
Surr Back/Zone 2 Sub-menu
Hardware Setup
1
Display the main menu.
Press the SETUP button on the front panel or
SETUP button on the remote controller to display
the main menu on the monitor and front display.
DSP
A
-
FO
RM LISTENING MODE MEMORY
THX
SURROUNDDIRECT
/
PURE AUDIO STEREO
FM
MODE
MEMORY
ENTER
RE
TURN
SETUP
TUNING
PRESET
SETUP/ENTER/
RETURN/Cursor
/ //
[ENTER]Quit:[SETUP]
Advanced Menu
0.Hardware Setup
1.Speaker Setup
2.Input Setup
3.Audio Adjust
4.Preference
5.Network Setup
Basic Menu
0.Hardware Setup
1.Speaker Impedance
2.Surr Back/Zone2
3.Remote Setup
4.TV Format
5.AM Frequency Step
[ENTER]Quit:[SETUP]
2
Use the and cursor buttons to select
“0. Hardware Setup” and then press the
ENTER button.
The “Hardware Setup” menu appears.
3
Use the and cursor buttons to select
an item and then press the ENTER button.
4
Use the and cursor buttons to select
an item and then use the and cursor
buttons to set the desired value.
5
Press the SETUP button to exit the Setup
menu.
Press the RETURN button to return to the previ-
ous menu.
0-1.Speaker Impedance
a.Minimum :6 ohms
Quit:[SETUP]
0-2.Surr Back/Zone2
a.Surr Back/Zone2
:Zone2
Quit:[SETUP]
30


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Onkyo TX-NR801 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Onkyo TX-NR801 in the language / languages: English as an attachment in your email.

The manual is 5,3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info