492660
64
Zoom out
Zoom in
Previous page
1/168
Next page
Advanced Operations
En-64
You can specify the output resolution for HDMI OUT
MAIN and COMPONENT VIDEO MONITOR OUT so
that the AV receiver upconverts the picture resolution as
necessary to match the resolution supported by your TV.
Tip
You can see the picture by pressing ENTER to check the
Resolution” setting for HDMI OUT MAIN (excluding NET
input source).
Note
Depending on the incoming video signal, the video playback may
not be smooth or the vertical resolution may be lowered. In this
case select anything other than “1080p/24”.
With some TVs, there may be no picture when this setting is set
to “4K Upscaling”.
If the “Monitor Out” setting is set to “Sub”, this setting is fixed
to “Through”.
If the “Monitor Out” setting is set to “Both”, this setting is fixed
to “Auto”.
*1
PC IN (Analog RGB input) signal is output at 480p
(480p/576p), 720p, 1080i resolution when the “Monitor Out
setting is set to “Analog” ( page 63) and the “Resolution
setting is set to “Through”.
*2
These settings are not available when the “Monitor Out
setting is set to “Analog” ( page 63).
HDMI Input
If you connect a video component to an HDMI input, you
must assign that input to an input selector. For example, if
you connect your Blu-ray Disc/DVD player to HDMI IN 2,
you must assign “HDMI2” to the “BD/DVD” input
selector.
If you’ve connected your TV to the AV receiver with an
HDMI cable, composite video and component video
sources can be upconverted
*
and output by the HDMI
output
*1
. You can set this for each input selector by
selecting the “-----” option. See “Video Connection
Formats” for more information on video signal flow and
upconversion ( page 111).
*1
This applies only when “Monitor Out” setting is set to other
than “Analog” ( page 63).
Here are the default assignments.
*2
If you connect your personal computer to PC IN (Analog
RGB), you must assign “-----” to the “PC” input selector.
BD/DVD, CBL/SAT, STB/DVR, GAME1, GAME2,
PC, TV/CD, PHONO
` HDMI1, HDMI2, HDMI3, HDMI4, HDMI5,
HDMI6, HDMI7, HDMI8:
Select the input to which the component has been
connected.
` -----:
Output composite video and component video
sources from the HDMI output. The video output
signal from the HDMI output is the one configured in
“Component Video Input”.
Each HDMI input cannot be assigned to two input selectors
or more. When HDMI1 - HDMI8 have already been
assigned, you must first set any unused input selectors to
-----” or you will be unable to assign HDMI1 - HDMI8
to other input selectors.
Note
For composite video and component video upconversion for the
HDMI output, the “Monitor Out” setting must be set to other
than “Analog” ( page 63), and the “HDMI Input” setting
must be set to “-----”. See “Connection Tips and Video Signal
Path” for more information on video signal flow and
upconversion ( page 111).
The assignment of input selector selected for Zone 2 cannot be
changed when the “Zone 2 HDMI” is set to “Use” ( page 63).
If no video component is connected to the HDMI input (even if
the HDMI input is assigned), the AV receiver selects the video
source based on the setting of “Component Video Input”.
When an HDMI IN is assigned to an input selector as explained
here, the same HDMI IN will be set as a priority in the “Digital
Audio Input” ( page 65). In this case, if you want to use the
coaxial or optical audio input, make the appropriate selection in
the “Audio Selector” setting ( page 80).
Do not assign an HDMI IN to the TV/CD selector while “HDMI
Control(RIHD)” is set to “On” ( page 83), otherwise
appropriate CEC (Consumer Electronics Control) operation will
not be guaranteed.
If you assign “-----” to an input selector that is currently
selected in “HDMI Through” ( page 84), the “HDMI
Throughsetting will be automatically switched to “Off”.
•“AUX” is used only for input from the front panel.
Input selector Default assignment
BD/DVD HDMI1
CBL/SAT HDMI2
STB/DVR HDMI3
GAME1 HDMI4
GAME2 HDMI5
PC
HDMI6
*2
AUX FRONT (Fixed)
TV/CD -----
PHONO -----
IN
OUT
Composite video,
component video
HDMI
HDMI
Composite video,
component video
64


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Onkyo TX-NR5010 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Onkyo TX-NR5010 in the language / languages: English as an attachment in your email.

The manual is 4,85 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Onkyo TX-NR5010

Onkyo TX-NR5010 User Manual - German - 168 pages

Onkyo TX-NR5010 User Manual - Dutch - 168 pages

Onkyo TX-NR5010 User Manual - French - 168 pages

Onkyo TX-NR5010 User Manual - Italian - 168 pages

Onkyo TX-NR5010 User Manual - Swedish - 168 pages

Onkyo TX-NR5010 User Manual - Spanish - 168 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info